search

GE JTP20 User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • BOOKMARKS
    • Rated. / 5. Based on customer reviews
Page view 10
11
a. With oven installed, take the bottom trim
and center it on the bottom front edge of
the cabinet opening.
b. Using the trim
as a template,
mark the center
of each slot
(two total) where
the mounting holes
will be drilled.
c. Remove the trim.
d. Drill pilot holes into the center
of each template mark.
Installation Instructions
Installing the Metal
Bottom Trim
IMPORTANT: If this unit is ever
removed from the cabinet or the oven
is ever pulled out for service, the trim
must be removed first or damage to
the trim will occur.
C4
To install a single metal bottom trim assembly (on some models), use sections C3 and C4.
To install a metal bottom trim with a plastic bottom trim (on some models), use sections C3–C5.
Installing the Plastic Bottom
Trim
(on some models)
a. Make sure flat side is up on the plastic
bottom trim.
b. Find the key slot on the back of the trim.
d. Push the trim down, at both ends, until it
snaps securely into place.
c. Match the key slot with the rivet on the
bottom of the side trim, and lower the trim
onto the rivet.
C5
Lower Trim Mounting Rivet
on End of Metal Lower Trim
Key Hole Slot and Wide Flange at Top
Preparing for the Bottom
Trim Installation
C3
Side
Trim
Trim Screws
Side
Trim
Metal Lower Trim
CAUTION: Be sure you
do not tip the oven forward
during installation or you may
bend the bottom trim. The bottom trim
provides an opening for cooling air to
enter the cabinet. This opening should
never be blocked.
Remove
Lower Trim
Before
Pre-drilling
Mounting
Holes
With Lower Trim
in Position, Mark
(2) Mounting Hole
Locations
a. Place the bottom metal trim centered over
the pre-drilled mounting holes. Tape the
edges of the trim down to maintain the
alignment.
b. Using two trim screws provided, secure
the bottom trim to the bottom edge of the
cabinet. If a plastic bottom trim is supplied,
proceed to C5.
Push Trim Down at Both Ends
Until it Snaps Securely Into Place
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments
Related products and manuals for Ovens GE JTP20
Ovens GE JGBS24 User Manual   (44 pages)
Ovens GE JGBP35GZA User Manual   (48 pages)
Ovens GE PT925DNBB Instruction Manual    (28 pages)
Ovens GE PT9800SHSS Instruction Manual    (4 pages)
Ovens GE PT7550EHES Use and Care Manual   (48 pages)
Ovens GE CT9070SHSS Use and Care Manual   (40 pages)
Ovens GE JD630DFWW Installation Guide    (24 pages)
Ovens GE PT9050SFSS Instruction Manual    (16 pages)
Ovens GE CK7000SHSS Installation Guide    (16 pages)
Ovens GE JGS650DEFBB Instruction Manual   (1 pages)
Ovens GE JB755SJSS Installation Guide    (2 pages)
Ovens GE P2S920SEFSS Instruction Manual   (2 pages)
Ovens GE JGB870SEFSS Installation Guide   (1 pages)
Ovens GE JRP20WJWW Instruction Manual   (4 pages)
Ovens GE JS630DFWW Instruction Manual    (2 pages)
Ovens GE JGBS64REFSS Instruction Manual   (1 pages)
Ovens GE CT9070SHSS Instruction Manual    (16 pages)
Ovens GE PS950EFES Instruction Manual    (2 pages)
Ovens GE JX15BUMPWW Installation Guide   (4 pages)
Ovens GE JGS750EEFES Instruction Manual   (1 pages)
  • COM 21 Simple Tread Bird-X IGEN Cary Audio Design
  • Garmin Navigational compasses DAEWOO ELECTRONICS LCD TVs Oregon MP3/MP4 players AGFA Scanner Transparancy Adapters Graco Power fine-spray systems
  • RadonAway 23032-1 LG LHD627 LG SIGNATURE LUDP8997SN Xerox Phaser 7800 Electrolux EDH3686GDE
  • Sony SLT-A37 User Manual Remko ELT 3-2 User Manual Bazooka BASE TUBE Specifications Sony VGP-BGU1 User Manual Yamaha CLP-295GP User Manual