GE PK916 User Manual download pdf (Page 20)

20

Safety Instructions

Operating Instructions

Care and CleaningTroubleshooting Tips

Consumer Support

Auto Recipe

™

Conversion (on some models)

When using convection bake, the Auto Recipe

™

Conversion feature will automatically convert

entered regular baking temperatures to

convection baking temperatures.

Once the feature is activated, the display

will show the actual converted (reduced)

temperature. For example, if you enter a regular

recipe temperature of 350°F and press the

Start pad, the display will show CON and

the converted temperature of 325°F.

NOTE: This feature does not convert convection

bake cooking times, only regular baking

temperatures.

To activate the feature:

Press the Bake and Broil Hi/Lo

pads (on double oven models,

use the upper oven controls) at

the same time for 3 seconds,

until the display shows SF.

Press the Convection Bake pad. The

display will show CON OFF. Press the

Convection Bake pad again. The

display will show CON ON.

Press the Start pad.

To deactivate the feature, repeat steps

1–3 above but press the Start pad when

CON OFF is in the display.

Special features of your oven control.

Tones at the End of a Timed Cycle

At the end of a timed cycle, 3 short beeps will

sound followed by one beep every 6 seconds until

the Clear/Off pad is pressed. This continuous

6-second beep may be canceled.

To cancel the 6-second beep:

Press the Bake and Broil Hi/Lo

pads (on double oven models use

the upper oven controls) at the same

time for 3 seconds, until the display

shows SF.

Press the Kitchen Timer On/Off

pad. The display shows CON BEEP

(continuous beep). Press the

Kitchen Timer On/Off pad again.

The display shows BEEP. (This

cancels the one beep every

6 seconds.)

Press the Start pad.

NOTE: On double oven models, this cancels the

end-of-cycle tone for both ovens.

+

+

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 67 68

Comments to this Manuals

No comments