GE EPM 5300 User Manual download pdf (Page 89)

CHAPTER 15: PROGRAMMING QUICK REFERENCE

GE Industrial Systems 5300P Advanced Power Meter 85

CHAPTER 15

PROGRAMMING QUICK REFERENCE

15.1: Entering the Programming Mode

1. Hold PHASE/NEXT key and press AMPS key.

2. Display blanks and shows either a ‘0’,

‘1’, or ‘3’.

3. If ‘3’ is not displayed then press AMPS key until ‘3’ is displayed.

4. Release AMPS key and press PHASE/NEXT key, while ‘3’ is still displayed.

5. Display shows ‘333’ momentarily.

6. Upper display starts counting. Press PHASE/NEXT key when ‘5’ is displayed to register the ‘5’.

7. Repeat step 6 until ‘555’ has been registered.

15.2: Data Entry Sequence

1. At programmable numerical fields or Switch Pack fields, Press AMPS key to begin Data Entry

Sequence.

2. The current setting moves to middle row of display and dashes appear in the bottom row. Press

VOLTS key to toggle between available choices.

3. When a correct choice is selected, press AMPS key to store.

15.3: Programming Groups

Programming

groups

Description

Global Meter Setup—Integration Interval, Meter Address,

Communication Setting, Relay Settings

Full Scale Settings. Voltage Full Scale, Current Full Scale and Power

Function Full Scale.

Meter Calibration

Calibration Ratios

Volts and Current Limits

Power Function Limits

THD Limits

Imbalance Reversal Limits

DC Output Calibration

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 99 100

No comments

GE EPM 5300 User Manual Page 89