Ge P485 User Manual download pdf (Page 11)

P485 MODBUS TO PROFIBUS CONVERTER – USER GUIDE 2–1

GE Consumer & Industrial

P485 Modbus to Profibus

Converter

Chapter 2: Installation

Instal lation

Quick install

PROCEDURE 1. Snap the P485 on to the DIN-rail (see DIN-rail mounting on page 2–5).

2. Connect the Profibus cable (see Profibus connector on page 2–2).

3. Connect the serial Modbus network cable (see Modbus connector on page 2–4 for

details).

4. Connect a PC using the configuration cable (see Configuration cable on page 2–3).

5. Connect the power cable and apply power to the unit (see Power connector on page

2–4 for details).

6. Start the EnerVista P485/D485 Setup software.

7. Normally, the EnerVista P485/D485 Setup detects the correct serial port. If this does

not occur, select the correct port through the Port menu item.

8. Configure the P485 using EnerVista P485/D485 Setup and download the configuration

to the unit.

9. Configure and power-up the Modbus network device for communication.

Electrical installation

OVERVIEW The location of the various electrical connectors is shown below.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 75 76

No comments

Ge P485 User Manual Page 11