Ge HC HP User Manual

GE MDS Intrepid-HC HP Wireless Broadband Transceiver Version 1.x Reference Manual Part # 05-4811A01, Rev. A

GE MDS Intrepid-HC HP Installation Guide 1-4 1+0/1+1 Installation This section describes the installation procedure for GE MDS Intrepid-HC HP in

B-2 GE MDS Intrepid-HC HP Installation Guide

GE MDS Intrepid-HC HP Installation and Operation C-1 Appendix C: Frequency Information General This appendix provides frequency information for the

C-2 GE MDS Intrepid-HC HP Installation and Operation FCC 101.147(i7) T/R Separation n (L) Center Frequency MHz n (H) Center Frequency MHz 1

GE MDS Intrepid-HC HP Installation and Operation C-3 ITU-R F.384-7 T/R Separation n (L) Center Frequency MHz n (H) Center Frequency MHz 1 5955.00 1

C-4 GE MDS Intrepid-HC HP Installation and Operation 6H GHz (6.45-7.1 GHz) ITU-R F.384-7 T/R Separation n (L) Center Frequency MHz n (H) Cent

GE MDS Intrepid-HC HP Installation and Operation C-5 12 6705 12 6865 40 1 6535 1 6575 7 GHz (7.1-7.9 GHz) ITU-R 385-7 [1] T/R Separation n (L) Ce

C-6 GE MDS Intrepid-HC HP Installation and Operation ITU-R 385-7 [1] T/R Separation n (L) Center Frequency MHz n (H) Center Frequency MHz 1

GE MDS Intrepid-HC HP Installation and Operation C-7 ITU-R 385-7 [0] T/R Separation n (L) Center Frequency MHz n (H) Center Frequency MHz 1 7263.5

C-8 GE MDS Intrepid-HC HP Installation and Operation ITU-R 385-7 [0] T/R Separation n (L) Center Frequency MHz n (H) Center Frequency MHz 1

GE MDS Intrepid-HC HP Installation and Operation C-9 ITU-R 385-7 [0] T/R Separation n (L) Center Frequency MHz n (H) Center Frequency MHz 1 7563.5

GE MDS Intrepid-HC HP Installation Guide 1-5 3. Gently slide the RFU in the OCB, making sure that the two empty spaces in the RFU correspon

C-10 GE MDS Intrepid-HC HP Installation and Operation ITU-R 385-7 [3] T/R Separation n (L) Center Frequency MHz n (H) Center Frequency MHz

GE MDS Intrepid-HC HP Installation and Operation C-11 ITU-R 385-7 [4] T/R Separation n (L) Center Frequency MHz n (H) Center Frequency MHz 1 7442

C-12 GE MDS Intrepid-HC HP Installation and Operation ITU-R 386-6 [1] T/R Separation n (L) Center Frequency MHz n (H) Center Frequency MHz

IN CASE OF DIFFICULTY... GE MDS products are designed for long life and trouble-free operation. However, this equipment, as with all electronic equip

GE MDS, LLCRochester, NY 14620General Business: +1 585 242-9600FAX: +1 585 242-9620Web: www.GEmds.com175 Science Parkway

GE MDS Intrepid-HC HP Installation Guide 1-6 Assembling the Hanger Kit The Hanger Kit is used to connect two RFUs and OCBs to the

GE MDS Intrepid-HC HP Installation Guide 1-7 Assembling the Pole Mount Kit The Pole Mount Kit is used to connect the Hanger Kit (together with the

GE MDS Intrepid-HC HP Installation Guide 1-8 Assembling the Hanger Kit (with RFU and OCB) and Pole Mount Kit To assemble the Hanger Kit and the P

GE MDS Intrepid-HC HP Installation Guide 1-9 2. Fasten the Hanger Kit to the Pole Mount Kit using 4 large (M-10 type) screws, as shown in

GE MDS Intrepid-HC HP Installation Guide 1-10 Each Pole Mount Kit can accommodate two RFUs and OCB units, as shown in the following illustration

GE MDS Intrepid-HC HP Installation Guide 1-11 RFU Cable Connections The RFU cable connectors are located on the bottom of the RFU, as shown in the f

GE MDS Intrepid-HC HP Installation Guide 1-12 2+2 XPIC Installation This section describes the installation procedure for GE MDS Intrepid-HC HP i

GE MDS Intrepid-HC HP Installation Guide 1-13 Installation Components Installation Procedure 1. Connect both pole mount kits to the pol

GE MDS Intrepid-HC HP Installation Guide 1-14 Important: The diameter of the pole upon which the kit is mounted must be between 50 mm (2") a

GE MDS Intrepid-HC HP Installation Guide 1-15 8. Connect the flexible waveguides to the antennas, as shown in the illustration above (V

GE MDS Intrepid-HC HP Installation Guide 1-16 N+1 Split Mount Installation This section describes the installation procedure for GE MDS Intrepid-

GE MDS Intrepid-HC HP Installation Guide 1-17 Note: When installing an N+1 configuration, assemble the OCBs in an inverted order, to maintain the sa

GE MDS Intrepid-HC HP Installation Guide 1-18 Installation Configuration Illustrations This section provides illustrations of different GE MDS In

GE MDS Intrepid-HC HP Installation Guide 1-19 1+0 & 1+0 Space Diversity TX FilterRX FilterRX FilterTXRX MRX DTX f1RX f1RX f1OCBtype 1RFU50ohmFle

GE MDS Intrepid-HC HP Installation Guide 1-20 1+1 Hot Standby & 1+1 Hot Standby Space Diversity 1+1 HSB ConfigurationB.L W .GM.PS.P1+1 HSBM.A

GE MDS Intrepid-HC HP Installation Guide 1-21 1+1 Frequency Diversity & 1+1 Frequency Diversity + Space Diversity B.L W .GM.PS.P1+0 FDM.AD.AM.AD

GE MDS Intrepid-HC HP Installation Guide 1-22 1+1 Space Diversity BBS 1+1 SD BBS ConfigurationB.L W .GM.PS.P1+0 SD BBSM.AD.AM.AD.A0d B 0.5d BN/AN

GE MDS Intrepid-HC HP Installation Guide 1-23 2+0 Dual Pole & 2+0 Space Diversity Dual Pole 2+0 DP Configuration2+0 SD DP ConfigurationB.L W .

Table of Contents Chapter 1 Installation... 1-1 General...

GE MDS Intrepid-HC HP Installation Guide 1-24 2+0 Single Pole & 2+0 Space Diversity Single Pole 2+0 SP Configuration2+0 SD SP Configuration

GE MDS Intrepid-HC HP Installation Guide 1-25 2+2 Hot Standby Dual Pole TX FilterRX FilterRX FilterTXRX MRX DTX f1RX f1RX f1OCBtype 2RFUTX FilterRX

GE MDS Intrepid-HC HP Installation Guide 1-26 2+2 Hot Standby Single Pole TX FilterRX FilterRX FilterTXRX MRX DTX f2RX f2RX f2OCBtype 2RFUTX Filt

GE MDS Intrepid-HC HP Installation Guide 1-27 2+2 Space Diversity Dual Pole 2+2 SD DP ConfigurationB.L W .GM.PS.P2+2 SD DPAM.AD.AM.AD.A0.5dB1.6/1.8

GE MDS Intrepid-HC HP Installation Guide 1-28 2+2 Space Diversity Single Pole 2+2 SD SP ConfigurationTX FilterRX FilterRX FilterTXRX MRX DTX f2

GE MDS Intrepid-HC HP Installation Guide 1-29 2+2 Frequency Diversity Single Pole B.L W .GM.PS.P2+2 FD SPAM.AD.AM.AD.A0.75dB1d BN/AN/AN/AN/AN/AN/AT

GE MDS Intrepid-HC HP Installation Guide 1-30 2+2 Hot Standby Frequency Diversity Dual Pole 2+2 HSB FD DP ConfigurationB.L W .GM.PS.P2+2 FD DPA

GE MDS Intrepid-HC HP Installation Guide 1-31 2+2 Frequency Diversity / Space Diversity Dual Pole 2+2 SD/FD DP ConfigurationTX FilterRX FilterRX F

GE MDS Intrepid-HC HP Installation Guide 1-32 N+1 Systems 4+1 FD DP ConfigurationTX FilterRX FilterRX FilterTXRX MRX DTX f3RX f3RX f3OCBtyp e2

GE MDS Intrepid-HC HP Installation Guide 1-33 IFIFIFIFIFN MS & WAYSID E POWERIDMSwitch card (XC)IDMIDMSTM-1STM-1STM-1IDCIDCIDCIDMSTM-1IFIFIFIFIF

Safety Precautions & Declared Material Fiber Optic Line Precautions Before turning on the equipment, make sure that the fiber optic cable is

GE MDS Intrepid-HC HP Installation Guide 1-34 4+1 FD SD DP ConfigurationTX FilterRX FilterRX FilterTXRX MRX DTX f3RX f3RX f3OCBtyp e2RFUTX Filt

GE MDS Intrepid-HC HP Installation Guide 1-35 IFIFIFIFIFN MS & WAYSID E PO WERIDMSwitch card (XC)IDMIDMSTM-1STM-1STM-1IDCIDCIDCIDMSTM-1IFIFIFIFI

GE MDS Intrepid-HC HP Installation Guide 1-36

MDS Intrepid-HC HP Installation and Operation 2-1 Chapter 2: Initial System Setup General After the system is installed and tested, and antenna alig

2-2 MDS Intrepid-HC HP Installation and Operation - Setting up external alarms Connecting the Line Interfaces Initial Setup using the Craft Termin

GE MDS Intrepid-HC HP Installation Guide 2-3 Defining IP Addresses Before you can configure the MDS Intrepid-HC HP system, you need to define IP addr

2-4 MDS Intrepid-HC HP Installation and Operation To define IP Addresses: 1. In the main terminal program menu, select Configuration. 2. Select ID

GE MDS Intrepid-HC HP Installation Guide 2-5 Additional Setup Using the NMS Some of the initial setup procedures require the use of The NMS. Once ini

2-6 MDS Intrepid-HC HP Installation and Operation Starting the NMS 1. Select Start, Programs, NMS, NMS Element Manager. The NMS Login window appear

GE MDS Intrepid-HC HP Installation Guide 2-7 Setting the Local TX Frequency Channel If the TX frequency was previously defined using the HyperTermina

Safety Precautions & Declared Material (continued) Static electricity may cause bodily harm, as well as harm to electronic components inside th

2-8 MDS Intrepid-HC HP Installation and Operation Or click the up/down arrows in the TX Channel field to select the channel (the frequency will be

GE MDS Intrepid-HC HP Installation Guide 2-9 Specifying System Information To specify system information: 1. Select File, Local/Remote, System Inform

2-10 MDS Intrepid-HC HP Installation and Operation Local/Remote Transport Configuration The Local/Remote Transport Configuration window allows you

GE MDS Intrepid-HC HP Installation Guide 2-11 Trap Forwarding Configuration Window 2. In the Managers IP Address area, specify the IP addresses of

2-12 MDS Intrepid-HC HP Installation and Operation External Alarms Setup The procedure detailed in this section is required only if alarms generate

GE MDS Intrepid-HC HP Installation Guide 2-13 The alarm outputs are Form C Relays. Each output relay provides three pins, as follows: Normally Open (

2-14 MDS Intrepid-HC HP Installation and Operation Initial Setup for Intrepid-HC HP/T IDU Initial Setup Steps for up to 9+1 Configuration Cascading

GE MDS Intrepid-HC HP Installation Guide 2-15 Defining IP Addresses Before you can configure the Intrepid-HC HP/T system, you need to define four IP

2-16 MDS Intrepid-HC HP Installation and Operation The following figure illustrates an Intrepid-HC HP/T management model from an EMS/NMS point of v

GE MDS Intrepid-HC HP Installation Guide 2-17 Note that the Inband bytes run through the upper level of the cluster. The Ethernet interface of every

2-18 MDS Intrepid-HC HP Installation and Operation 2. High protocol timing constraints (SNMP/TFTP) are expected in Intrepid-HC HP/T link chains du

GE MDS Intrepid-HC HP Installation Guide 2-19 Important: After you set up IP addresses, restart the IDUs to activate them. 7. Repeat the steps abov

2-20 MDS Intrepid-HC HP Installation and Operation Additional Setup Using the NMS After you perform initial setup via the terminal, some additional

GE MDS Intrepid-HC HP Installation Guide 2-21 Starting the NMS 1. Select Start, Programs, NMS, NMS Element Manager. The NMS Login window appears. NM

2-22 MDS Intrepid-HC HP Installation and Operation Main NMS Window for Intrepid-HC HP/T Setting the Local TX Frequency Channel If the TX frequency

GE MDS Intrepid-HC HP Installation Guide 2-23 RFU Configuration Window 2. In the Frequency Control section, set the TX Channel to the required chan

2-24 MDS Intrepid-HC HP Installation and Operation Setting up the N+1 Configuration 1. Select Protection, H/W protection, H/W protection type.

GE MDS Intrepid-HC HP Installation Guide 2-25 9+1 - cascade mode, ten separate carriers with one protected. 3. Select Protection, H/W protection, H/W

2-26 MDS Intrepid-HC HP Installation and Operation first hitless fault. When the fault is cleared, the MUX will receive data from two sources: the

GE MDS Intrepid-HC HP Installation Guide 2-27 System Information Window 2. In the Current Time area, click Date/Time Configuration and set the date

GE MDS Intrepid-HC HP Installation Guide 1-1 Chapter 1: Installation General This guide provides installation procedures for the following GE MDS Int

2-28 MDS Intrepid-HC HP Installation and Operation Local/Remote Transport Configuration The Local/Remote Transport Configuration window allows you

GE MDS Intrepid-HC HP Installation Guide 2-29 Trap Forwarding Configuration This section explains how to set up a trap forwarding plan. If your appli

2-30 MDS Intrepid-HC HP Installation and Operation 3. In the Send Trap for Alarms of Group section, you determine which alarms will be sent as SNMP

GE MDS Intrepid-HC HP Installation Guide 2-31 Input/Output External Alarms Window Follow the steps below for both the Local and Remote sides. The mi

2-32 MDS Intrepid-HC HP Installation and Operation LOF IDU ODU Cable Remote The default alarm output setting for each relay is “Power”. The relays

MDS Intrepid-HC HP Installation and Operation 3-1 Chapter 3: Acceptance & Commissioning Procedures General This chapter provides the factory&ap

3-2 MDS Intrepid-HC HP Installation and Operation Site Acceptance Procedure The purpose of the following procedures is to verify that all installati

MDS Intrepid-HC HP Installation and Operation 3-3 SITE ACCEPTANCE CHECKLIST (continued) 4. OUT-DOOR UNIT Type of RFU mount: (Direct or Remote moun

3-4 MDS Intrepid-HC HP Installation and Operation SITE ACCEPTANCE CHECKLIST (continued) 7. FLEXIBLE WAVEGUIDE Flexible WG type: Flexible WG is co

MDS Intrepid-HC HP Installation and Operation 3-5 SITE ACCEPTANCE CHECKLIST (continued) 11. REMARKS/NOTES 12. GENERAL INFORMATION Name: Title:

GE MDS Intrepid-HC HP Installation Guide 1-2 2+0 Configuration The GE MDS Intrepid-HC HP RFU works together with Intrepid-HC, Intrepid-HC HP/T, a

3-6 MDS Intrepid-HC HP Installation and Operation 2. Antenna Antenna is grounded as per site specifications. See the third point in the Antenna Mo

MDS Intrepid-HC HP Installation and Operation 3-7 1+0 Commissioning Procedure Scope This section describes the recommended commissioning tests for

3-8 MDS Intrepid-HC HP Installation and Operation Management Verification Install network management software on the PC, and launch the program.

MDS Intrepid-HC HP Installation and Operation 3-9 1+1 Commissioning Procedure Scope This section describes the recommended commissioning tests for

3-10 MDS Intrepid-HC HP Installation and Operation error-free operation for at least 1 hour. Use a physical loop between the splitters at the far en

MDS Intrepid-HC HP Installation and Operation 3-11 Interoperability Verification Connect the customer end equipment to the line interfaces and ve

3-12 MDS Intrepid-HC HP Installation and Operation 2+0 XPIC Commissioning Procedure Scope This section describes the recommended commissioning tests

MDS Intrepid-HC HP Installation and Operation 3-13 1. Power up drawer V on both ends of the link and record the RSL reading on one end. 2. Power

3-14 MDS Intrepid-HC HP Installation and Operation XPIC Recovery Verification In order to verify XPIC operation, simulate the faults described below

MDS Intrepid-HC HP Installation and Operation 3-15 GE MDS Intrepid-HC HP Commissioning Log The Commissioning Log is an integral part of the commiss

GE MDS Intrepid-HC HP Installation Guide 1-3 About the GE MDS Intrepid-HC HP OCBs GE MDS Intrepid-HC HP RFUs and OCBs (Outdoor Circulator Blocks) ca

3-16 MDS Intrepid-HC HP Installation and Operation GE MDS Intrepid-HC HP LINK COMMISSIONING LOG (continued) 3. RFU Site 1 Drawers Right / Left Site

MDS Intrepid-HC HP Installation and Operation 3-17 GE MDS Intrepid-HC HP LINK COMMISSIONING LOG (continued) 6. COMMISSIONING TESTS Site 1 Drawers

3-18 MDS Intrepid-HC HP Installation and Operation GE MDS Intrepid-HC HP LINK COMMISSIONING LOG (continued) 9. INSTALLATION INFORMATION Name: Compa

GE MDS Intrepid-HC HP Installation and Operation A-1 Appendix A: Connector Pin-Outs General This appendix provides pin-outs for IDU connectors, incl

A-2 GE MDS Intrepid-HC HP Installation and Operation External Alarms Connector Pin-Out The External Alarms connector is a D-type 15 pin connector.

GE MDS Intrepid-HC HP Installation and Operation A-3 Protection Connector Pin-Out The Protection connector for is an Rj-45, 8-pin, male type connect

A-4 GE MDS Intrepid-HC HP Installation and Operation Notes: • Shell is connected to IDU chassis GND. • The following pins are not connected: 27,2

GE MDS Intrepid-HC HP Installation and Operation A-5 Wayside Channel Connector Pin-Outs The following are pin-outs for Wayside channel interfaces. E

A-6 GE MDS Intrepid-HC HP Installation and Operation

GE MDS Intrepid-HC HP Installation Guide B-1 Appendix B: PPP/SLIP Driver Installation Installation for Windows 2000/2003/XP 1. Click Start, Setting