GE GBE20ETEBB Use and Care Manual download pdf (Page 24)

TRANSFER REFRIGERATOR AND

FREEZER DOOR STOPS

Remove the door stop on the right side of the

bottom of the door by removing the two screws.

Move the plastic hinge hole thimble to the

opposite hole.

Install the door stop on the left side, making

sure to line up the screw holes in the door stop

with the holes in the bottom of the door.

Bottom of Door (Right Side) Bottom of Door (Left Side)

TRANSFER REFRIGERATOR

DOOR HANDLE TO RIGHT

Refer to Remove the Fresh Food Door Handle

and Attach the Fresh Food Door Handle

sections for instructions.

Installation Instructions

INSTALL BOTTOM HINGE AND

LEVELING LEG

Using a 1/2” socket ratchet/driver, install the

hinge pin and nut in the opposite hole on the

hinge bracket with leveling leg.

Using a 5/16” socket ratchet/driver, install the

hinge bracket with leveling leg on the left side

of the refrigerator. The pin will be toward the

outside of the refrigerator.

Using a 5/16” socket ratchet/driver, install the

leveling leg bracket on the right side of the

refrigerator.

REHANG FREEZER DOOR

Lower the freezer door onto the bottom hinge pin.

Ensure that the plastic hinge pin thimble is on the

hinge pin or inside the door hinge pin hole located

in the bottom of the door.

Straighten the door and line it up with the

center hinge bracket.

Install the center hinge pin with a 3/4” socket

ratchet/driver. Turn it until it extends through

the hinge bracket and into the freezer door.

REVERSING THE DOOR SWING (cont.)

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 119 120

No comments

GE GBE20ETEBB Use and Care Manual Page 24