GE JVE40DTBB Owner's Manual download pdf (Page 8)

49-80622-5

PART QUANTITY

Metal Grease Filters 2

Mounting Screws 4

Exhaust Adaptor/Damper 1

(for 3

ø4” x 10” rect. venting)

Exhaust Adaptor Screws 1

• If the unit is damaged in shipment, return the unit to the

store in which it was bought for repair or replacement.

• If the unit is damaged by the customer, repair or

replacement is the responsibility of the customer.

• If the unit is damaged by the installer (if other than

the customer), repair or replacement must be made

by arrangement between customer and installer.

DAMAGE-SHIPMENT/INSTALLATION

PARTS INCLUDED

MOUNTING SPACE

NOTES:

• This range hood is for installation over ranges up to 30”

wide.

• If you are going to vent your range hood to the outside,

see the “Ducting Requirements” section for exhaust duct

preparation.

66” or

more from

the cooking

surface

Flat blade and Phillips

screwdrivers

Pencil

Metal snips

(in some

applications)

Electric drill

Saw (saber or

keyhole)

Duct tape

Pliers

Level

Caulking

Tape measure

Charcoal Filters If recirculating

order Kit no. WB02X11000

OPTIONAL ACCESSORIES

This kits can be ordered from your GE supplier.

TOOLS YOU WILL NEED

1/4” pivoting

hex socket

Flashlight

Wire stripper

1/4” Nutdriver

Installation Instructions

Note: If the hood is installed for recirculation mode,

it is not ENERGY STAR

certified.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Comments to this Manuals

No comments

GE JVE40DTBB Owner's Manual Page 8

Comments to this Manuals

Related products and manuals for Cooker hoods GE JVE40DTBB