GE LISR310 User Manual download pdf (Page 11)

If Something Goes Wrong

Problem Possible Causes What to Do

Washer is unplugged • Make sure cord is plugged securely into a

working outlet.

Water supply is turned off • Turn both hot and cold taps fully on.

Controls are not set properly • Check controls and make sure Cycle knob

is pulled out to an on position.

Lid is open • Close lid and pull Cycle knob out to an on

position.

Circuit breaker/fuse is • Check house circuit breakers/fuses. Replace

tripped/blown fuses or reset breaker. Washer should have

separate outlet.

Washer Won’t Operate

Drain hose is kinked or • Straighten drain hose and make sure

improperly connected washer is not sitting on it.

• Top of drain outlet should be less than

1m (3 ft.) above floor.

Water Won’t Drain

Control is not set properly • Check water temperature control and adjust.

Water supply is turned off • Turn both hot and cold taps fully on and

or improperly connected make sure hoses are connected to correct

taps.

Water valve screens are • Turn off the water source and remove the

stopped up

water connection hoses from the upper back

of the washer. Use a brush or toothpick to

clean the screens in the machine. Reconnect

the hoses and turn the water source back on.

House water heater is not set • Make sure house water heater is delivering

properly water at 48°C.–65°C. (120°F.–150°F.).

Water Temperature

is Incorrect

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

No comments

GE LISR310 User Manual Page 11