GE SS1000 User Manual download pdf (Page 26)

8. Install the retaining ring into the shaft groove with the sharp edges away from

the motor.

9. Install the liquid end assembly onto the pump shaft. Do not force it in. Rotate

and place the liquid end onto the mechanical seal holder until seated against

motor adapter.

10. Install the four (4) 5/16-inch lock washers and bolts to hold the liquid end onto

the motor adapter and tighten.

11. Reinstall the pump (Section 3.0, Pump Installation).

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 41 42

No comments

GE SS1000 User Manual Page 26