GE QS24 UR User Manual download pdf (Page 28)

QS–24 UR SWITCH MODULE – QUICKSTART GUIDE

QUICKSTART GUIDE

A valid IP address and subnet mask can now be programmed into the Switch using the IP

config command as follows:

Z Type in “ipconfig ip=“.

Z Enter the IP address (in our example we will use a unique address

between 3.94.247.1 and 3.94.247.254), followed by a space.

Z Type in “mask=“ and enter the mask (in our example system we

would use 255.255.252.0).

Z If a default gateway is also required enter a space and type “dgw=“

Z Enter the IP address of the gateway, then select the enter key.

The switch will then indicate that the parameters have been set.

Z Save the settings using the Save command.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 57 58

No comments

GE QS24 UR User Manual Page 28