Components
UL certied 18 AWG (0.82 mm
2
) supply wire
UL certied 22-14 AWG (0.33-2.08 mm
2
) wire connectors or
18-14 AWG (0.82-2.08 mm
2
) inline/IDC connectors
#6 x .75 inch (M3 x 19mm) self-tapping screws
Wiring end caps
Tetra
®
24VDC power supply
Line Fit Light end cap (GEDSREC1)
Tetra
®
extender mounting clip and extender rod (GEDSARC1)
Tetra
®
8 ft. mounting rail (GEDSRL08)
Line Fit Light-LED modules
6
7
8
9
1
2
3
4
5
1
2
3
4
5
7
8
6
T
C
Measure Point
9
Rail Length Requirements
SKU Module Length Cut Rail Length
GEF24T12xxxHOLED 2 ft. 20.79” (528.1mm)
GEF36T12xxxHOLED 3 ft. 32.79” (832.9mm)
GEF48T12xxxHOLED 4 ft. 44.79” (1137.7mm)
GEF60T12xxxHOLED 5 ft. 56.79” (1442.5mm)
GEF72T12xxxHOLED 6 ft. 68.79” (1747.3mm)
GEF84T12xxxHOLED 7 ft. 80.79” (2052.1mm)
GEF96T12xxxHOLED 8 ft. 92.79” (2356.9mm)
GEF18T12xxxHOLED 1.5 ft. 14.82” (376.5mm)
GEF30T12xxxHOLED 2.5 ft. 26.81” (681.1mm)
GEF42T12xxxHOLED 3.5 ft. 38.81” (985.8mm)
GEF64T12xxxHOLED 5.33 ft. 60.81” (1544.5mm)
Installation
Read the product labels of the old uorescent tubes
to determine Line Fit Light length required to span
height of sign based on table at right. Measure and
cut Tetra
®
mounting rail or other suitable mounting
means to appropriate length to t into sign.
1
Old Fluorescent tube
F48T12HO
or F48T8HO
New LED retrot
GEF48T12xxxHOLED
Orient Line Fit Light modules so LEDs are facing
front of sign, then rotate and insert the two endcap
ttings so they align with existing uorescent lamp
holders.
Secure the Line Fit Light modules to the mounting rail
using the extender mounting clips and extender rods.
Alternatively, secure modules into lip with a self-tapping
#6 (M3) screw or 1/8-inch (3.175mm) rivet.
32
Extender mounting
clips and extender rods
Alternative: fasten
directly to rails
Align with lamp
holder and
insert into rail
LEDs face front
of sign
Comments to this Manuals