GE GSM2200VBB Quick Specifications download pdf (Page 3)

Specification Revised 1/12

350518

GSM2200V

GE Spacemaker

Under-the-Sink Dishwasher

Listed by

Underwriters

Laboratories

Cabinet Rough-In Note: Either single- or

double-bowl sink may be used, centered

or offset, as shown in the front view

illustration.

The 20-1/2" maximum dimension from wall

to front of sink bowl must be accurate if

dishwasher is to fit properly under sink.

Water lines to sink faucet and drain from

sink can be run through area “A.”

HOT WATER line to dishwasher is installed

in area “B.”

Garbage disposer, water lines to faucet,

trap, waste air gap and water cutoff valve

are installed in 12" wide cabinet shown

in area “C.” Sink opening for garbage

disposer must be dimensioned as shown in

front view, area “C” (7-1/2"). This will provide

clearance for the disposer and plumbing in

cabinet “C” when using double bowl sink.

If the sink bowl is more than 20-1/2"

maximum specified distance form the

wall, or if the base cabinet is less than the

24" minimum depth from the wall, a gap

between the tub front flange and the front

of the base cabinet may result.

Cabinet Rough-In Dimensions (in inches)

Cabinet Cut-Out for Sink Dimensions (in inches) Undersink Dishwasher Wood Insert Dimensions

(in inches)

1 2 3 4

No comments

GE GSM2200VBB Quick Specifications Page 3