GE GIE21GTHBB Use and Care Manual download pdf (Page 18)

REMOVE REFRIGERATOR DOOR

1. Remove all food from the inner door liner.

2. Tape the door shut with masking tape.

3. Remove the center hinge pin with a Phillips

screwdriver.

4. Remove the center hinge by removing two hinge

screws with a 5/16s socket and ratchet. Save the

center hinge, hinge pin, screws and center hinge

gasket.

5. Remove the tape and tilt the door away from the

cabinet. Lift the door straight up to free its bottom

socket from the pin in the bottom hinge bracket.

6. Set the door on a non-scratching surface with the

inside up.

7. Install the 2 hole plugs from the opposite side of

the cabinet to the screw holes vacated by the

center hinge removal.

TRANSFER BOTTOM HINGE TO THE

LEFT

1. Using a 5/16 Socket

and ratchet, remove

the 2 screws from the

bottom hinge.

2. Move the bottom

hinge pin from the

right to the left side

with a thin-blade

screwdriver until the

shoulder of the hinge

pin is touching the

hinge.

3. Move the bottom

hinge from the right

to the left side and

tighten the 2 screws.

4. Install the 2 hole

plugs from the

opposite side of the

cabinet to the screw

holes vacated by

the bottom hinge

removal.

TRANSFER DOOR STOP TO THE LEFT

1. On both the refrigerator and freezer doors,

remove the screws from the door stop on the

right with a Phillips screwdriver.

2. Install the door stop on the left of each door.

Center

Hinge Pin

Center Hinge

Gasket

Installation Instructions

REVERSING THE DOOR SWING (CONT.)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 83 84

Comments to this Manuals

No comments

GE GIE21GTHBB Use and Care Manual Page 18

Comments to this Manuals

Related products and manuals for Fridges GE GIE21GTHBB