GE 200D8074P037 User Manual download pdf (Page 23)

23

Installation Instructions

PUT THE REFRIGERATOR IN PLACE

Move the refrigerator to its final location.

4

LEVEL THE REFRIGERATOR

The refrigerator can be leveled by adjusting

the rollers located near the bottom hinges.

Rollers have three purposes:

• Rollers adjust so the door closes easily when

opened about halfway. (Raise the front about

5/8″ [16 mm] from the floor.)

• Rollers adjust so the refrigerator is firmly

positioned on the floor and does not wobble.

• Rollers allow you to move the refrigerator

away from the wall for cleaning.

To adjust the rollers:

• Turn the roller

adjusting screws

clockwise to raise

the refrigerator,

counterclockwise

to lower it. Use a

3/8″ hex socket or

wrench, or an

adjustable wrench.

5

Rollers

Roller adjusting screw

LEVEL THE DOORS

Adjust the refrigerator door to make the doors

even at the top.

To align:

Using a 7/16″ wrench, turn the door adjusting

screw to the right to raise the door, to the left

to lower it.

NOTE:

A nylon plug, imbedded in the threads

of the pin, prevents the pin from turning unless

a wrench is used.

After one or two turns of the wrench, open

and close the refrigerator door and check

the alignment at the top of the doors.

6

A

B

Doors should be even at top

Raise

7/16″ wrench

Raise

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 111 112

Comments to this Manuals

No comments