GE DPSE810EGWT User Manual download pdf (Page 6)

Installation Instructions

EXHAUST CAN

BE ADDED TO

LEFT OR RIGHT SIDE

9 DRYER EXHAUST TO RIGHT, LEFT

OR BOTTOM CABINET

WARNING - BEFORE PERFORMING

THIS EXHAUST INSTALLATION, BE SURE

TO DISCONNECT THE DRYER FROM ITS

ELECTRICAL SUPPLY. PROTECT YOUR

HANDS AND ARMS FROM SHARP EDGES

WHEN WORKING INSIDE THE CABINET.

BE SURE TO WEAR GLOVES

TAB LOCATION

Detach and remove the bottom, right or left side knockout

as desired. Remove the screw inside the dryer exhaust duct

and save. Pull the duct out of the dryer.

Cut the duct as shown and keep portion A.

Through the rear opening, locate the tab in the middle of

the appliance base. Lift the tab to about 45º using a flat

blade screwdriver.

REMOVE

SCREW

AND SAVE.

REMOVE

DESIRED

KNOCKOUT

(ONE ONLY).

FIXING HOLE

BEND TAB

UP 45

ADDING NEW DUCT

Reconnect the cut portion (A) of the duct to the blower

housing. Make sure that the shortened duct is aligned with

the tab in the base. Use the screw saved previously to secure

the duct in place through the tab on the appliance base.

RIGHT OR

LEFT SIDE

EXHAUST

PORTION "A"

FIXING

HOLE

• Preassemble 4" elbow with 4" duct. Wrap duct tape

around joint.

• Insert duct assembly, elbow first, through the side opening

and connect the elbow to the dryer internal duct.

• Apply duct tape as shown on the joint between the dryer

internal duct and the elbow.

ADDING ELBOW AND DUCT FOR

EXHAUST TO LEFT OR RIGHT

SIDE OF CABINET

DUCT

TAPE

DUCT

TAPE

CAUTION: Be sure not to pull or damage the

electrical wires inside the dryer

when inserting the duct.

CAUTION:

Internal duct joints must be

secured with tape, otherwise

they may separate and cause

a safety hazard.

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

GE DPSE810EGWT User Manual Page 6

Comments to this Manuals

Related products and manuals for Electric laundry dryers GE DPSE810EGWT