Ge 5500 User Manual download pdf (Page 16)

Installation Instructions

265 VOLT ELECTRICAL SUPPLY

REINSTALL JUNCTION BOX

• Reinstall the junction box by engaging the tab at the

lower rear, aligning the screw hole at the top and

driving the one screw until secure. Be sure that all

wire leads are inside the box and not pinched

between the box and the unit. The green insulated

ground wire from the unit MUST be connected to

the branch circuit ground wire.

Make all wire connections by using appropriate

UL-listed electrical connectors and techniques

(black to black, white to white and green to green).

REINSTALL JUNCTION

BOX COVER

1 Carefully tuck all wires and

connections back inside the

junction box. Be sure there

are no loose connections or

stray uninsulated wires

exposed.

2 Place the junction box cover

in place. Replace the two

screws removed earlier and

tighten securely.

3 Discard the unused portion of the plug and

the cordset.

230/208 Volt

Power Wall Plug Heater Wattage

Supply Kits Configuration Circuit Protective Device @ 230/208 Volts

RAK3152 Tandem 15 Amp Time Delay Fuse or Breaker 2.55/2.09 KW

RAK3202 Perpendicular 20 Amp Time Delay Fuse or Breaker 3.45/2.82 KW

RAK3302* Large Tandem 30 Amp Time Delay Fuse or Breaker 5.00/4.10 KW

265 Volt

Power Wall Plug Heater Wattage

Supply Kits Configuration Circuit Protective Device @ 265 Volts

RAK5152 Does Not Apply 15 Amp Time Delay Fuse or Breaker 1.7 KW

RAK5172 Does Not Apply 15 Amp Time Delay Fuse or Breaker 3.0 KW

RAK5202 Does Not Apply 20 Amp Time Delay Fuse or Breaker 3.7 KW

RAK5302* Does Not Apply 30 Amp Time Delay Fuse or Breaker 5.0 KW

* Not recommended for use on 7000 BTUH units.

POWER CONNECTION CHART

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Ge 5500 User Manual Page 16