Ge RCA High Definition Television User Manual download pdf (Page 22)

Connections & Setup

Chapter 1

Changing

Lists and Labels

The List & Labels part of the setup lets you edit your channel list and choose or

create a personal six-character label for each channel.

Note:

Changing List and Labels can be time consuming. You can

change these at a later time by accessing the Setup menu.

1. Press the left or right arrow button to scroll through the channels and

choose the one you want to edit.

Note:

Labels for digital channels cannot be changed—they come from

the signal sent by the broadcaster. If you're on a digital channel and

you want to switch to an analog channel, press the ANTENNA button

on your remote.

Press the down arrow to highlight the

In channel list

option. Press the left

In channel list option. Press the left In channel list

or right arrow button to add (the box is checked) or remove (the box is

unchecked) the channel from the list.

Press the down arrow to highlight the

Channel label

option. Press the left

Channel label option. Press the left Channel label

or right arrow button to scroll through the available list of 25 most common

labels. The last option in the list allows you to create your own six-

character label for the channel (the ﬁ rst letter of the label is highlighted).

4. Press the 1 or 2 number button to change the ﬁ rst letter of the label.

5. Press the right arrow to highlight the second letter, then press the 1 or 2

number button to change the second letter, etc...

6. When you are ﬁ nished creating your label, press OK. Select

Go back

to go

Go back to go Go back

to the

Auto Convergence

menu.

Auto Convergence menu.Auto Convergence

Automatic Convergence

Your HDTV’s picture tubes might have been disturbed during delivery or after

you moved the HDTV, causing the color in your HDTV to be out of alignment.

The colors adjust by starting auto convergence.

IMPORTANT:

Auto convergence works best once the HDTV has warmed

up for at least an hour. If you've just unpacked your HDTV, it's a good

idea to repeat the Auto convergence function when the HDTV's been

running for at least an hour. See page 51 for more information about Auto

convergence.

1. Press OK to begin auto convergence.

2. When the auto convergence is complete, the

Red center convergence

Red center convergence menu Red center convergence

appears. The cross in the middle of the screen should be yellow. If it is not,

use the arrow buttons to move the red cross to overlap the green cross.

Press OK when adjustments are complete.

3. The

Blue center convergence

menu appears with a cyan cross in the middle

Blue center convergence menu appears with a cyan cross in the middle Blue center convergence

of the screen. If it is not, use the arrow buttons to move the blue cross

to overlap the green cross. Press OK (the TV tunes to the last selected/

available channel in the channel list).

Go back

Channel number

In channel list

Channel label

ESP_ _ _

Enter the channel number or use </> keys.

Note:

If you're using an HD source (such as a separate

HDTV tuner or HDTV satellite receiver) on

the CMP or DVI input, you should run Auto

convergence separately for that input as well.

Tune to the input you’re using for the HD

source, then go to page 51 for information on

Auto convergence.

Go back

Automatic convergence

...

Press < or > key to launch the automatic

convergence. The process takes about 1 min.

Pressing OK before the end will stop th

process and keep old settings.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 63 64

Comments to this Manuals

No comments

Ge RCA High Definition Television User Manual Page 22

Comments to this Manuals

Related products and manuals for Camcorders Ge RCA High Definition Television