Ge 21018 User Manual download pdf (Page 27)

the originating handset does not answer within 20 seconds, the call is

automatically dropped.

MEMORY

You may store fifty 15-character names and 20-digit telephone numbers in

the handset memory.

STORING A NAME AND NUMBER IN MEMORY

1. Make sure the phone is OFF (not in talk mode).

2. Press the MEM key to display

SELECT MEMORY 01-50

3. Press the desired memory location button (01 through 50) or use the

CID/VOL (/\ or \/) button to scroll to desired the memory location.

NOTE: If the memory location is occupied, the memory location number and

stored name and telephone number appear in the display. If the memory

location is empty, “EMPTY” appears in the display.

4. Press the MEM key. The display shows

ENTER NAME

5. Use the touch-tone pad to enter a name (up to 15 characters). More than

one letter is stored in each of the number keys. For example, to enter Bill

Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the

letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for

the second letter L, and press the 1 key to insert a space between the first

and last name. Press the 7 key 4 times for the letter S; press the 6 key once

for the letter M; press the 4 key 3 times for the letter I; press the 8 key for

the letter T; press the 4 key twice for the letter H.

NOTE: If you make a mistake press the DEL button to backspace and erase

the wrong character(s) or number(s).

6. Press the MEM key to confirm and save the record. The display shows

ENTER TEL NUMBR

7. Use the touch-tone pad to enter the telephone number (up to 20 digits,

including pauses (press #PAUSE button)), and press the MEM key again

to save the record. The unit beeps to confirm.

NOTE: The system treats PAUSES as delays or spaces in the dialing sequence.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 91 92

No comments

Ge 21018 User Manual Page 27