GE WSSH300 User Manual Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
LOCATION OF YOUR WASHER
Do Not Install the Washer:
1. In an area exposed to dripping water or outside
weather conditions. The ambient temperature
should never be below 60°F (15.6°C) for proper
washer operation.
2. In an area where it will come in contact with curtains
or drapes.
3. On carpet. The floor MUST be a hard surface with
a maximum slope of 1/2 per foot (1.27 cm per
30 cm). To make sure the washer does not vibrate
or move, you may have to reinforce the floor.
IMPORTANT:
Minimum Installation Clearances
When installed in alcove: Sides, Rear,
Top = 0 (0 cm)
When installed in closet: Sides, Rear,
Top = 0 (0 cm), Front = 1 (2.54 cm)
Closet door ventilation openings required:
2 louvers each 60 square in. (387 cm
2
), located 3
(7.6 cm) from top and bottom of door
Undercounter Installation
If an undercounter installation is desired, a custom-sized
countertop is required (36 to the underside of the
countertop). No special washer top is required.
Mobile Home Installation
Installation must conform to Standard for Mobile Homes,
ANSI A119.1 and National Mobile Home Construction
and Safety Standards Act of 1974 (PL93-383).
Stacked Installation
If a stacked washer/dryer installation is desired,
you MUST use Stacking Kit WE25X10020.
This kit is available through your GE retailer.
Installation Instructions
12
ROUGH-IN DIMENSIONS
SIDE
3
3
4
(9.5 cm)
27
3
4
(70.5 cm)
24
(61 cm)
60
(152.4 cm)
Power Cord
33
3
8
(84.8 cm)
REAR
8
1
2
(21.6 cm)
27
(68.6 cm)
36
(91.3 cm)
6
3
4
(17.1 cm)
Water Inlets
33
1
2
(85.1 cm)
2
3
4
(7 cm)
Drain
32
1
4
(81.9 cm)
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Comments to this Manuals

No comments