GE PFWS4605 User Manual download pdf (Page 18)

27” (68.6cm)

39” (99cm)

34.4” (87.3cm)

39” (99cm)

Installation Instructions

LOCATION OF YOUR WASHER

Do Not Install the Washer:

1. In an area exposed to dripping water or outside

weather conditions. The ambient temperature

should never be below 60°F (15.6°C) for proper

washer operation.

2. In an area where it will come in contact with curtains or

drapes.

3. On carpet. The floor MUST be a hard surface with

a maximum slope of 1/2s per foot (1.27 cm per

30 cm). To make sure the washer does not vibrate

or move, you may have to reinforce the floor.

NOTE: If floor is in poor condition, use 3/4s impregnated

plywood sheet solidly attached to existing floor covering.

IMPORTANT:

Minimum Installation Clearances

 When installed in alcove: Sides, Rear,

Top = 0s (0 cm)

 When installed in closet: Sides, Rear,

Top = 0s (0 cm), Front = 1s (2.54 cm)

 Closet door ventilation openings required:

2 louvers each 60 square in. (387 cm

), located 3s

(7.6 cm) from top and bottom of door

ROUGH-IN DIMENSIONS

SIDE

FRONT

*NOTE:

With Washer Legs: 40.5” (102.5 cm)

(0.75” adjustability)

With Pedestal: 53.75” (136.6 cm)

(0.75” adjustability)

Stacked: 82.75” (209.8 cm)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 86 87

No comments

GE PFWS4605 User Manual Page 18