GE GFWS1705HDG Operations Instructions download pdf (Page 19)

Installation Instructions

LOCATION OF YOUR WASHER

Do Not Install the Washer:

1. In an area exposed to dripping water or outside

weather conditions. The ambient temperature should

never be below 60°F (15.6°C) for proper washer

operation.

2. In an area where it will come in contact with curtains

or drapes.

3. On carpet. The floor MUST be a hard level surface

with a maximum slope of 1/2” per foot (1.27 cm per

30 cm). To make sure the washer does not vibrate

or move, you may have to reinforce the floor.

NOTE: If the floor is in poor condition, use 3/4”

impregnated plywood sheet solidly attached to the

existing floor covering.

IMPORTANT:

Minimum Installation Clearances

• When installed in alcove: Sides, Rear,

Top = 0” (0 cm)

• When installed in closet: Sides, Rear,

Top = 0” (0 cm), Front = 1” (2.54 cm)

• Closet door ventilation openings required:

2 louvers each 60 square in. (387 cm), located 3”

(7.6 cm) from top and bottom of door

ROUGH-IN DIMENSIONS

SIDE

FRONT

27.0”

(68.6 cm)

NOTE: With pedestal, 52.6”

Stacked, 84”

39.8”

(101.09 cm)

39.8”

(101.09 cm)

1100/1200 series models: 32.1” (81.3 cm)

1600/1700 series models: 33.6” (85.3 cm)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

No comments

GE GFWS1705HDG Operations Instructions Page 19