GE USN 60 Brochure download pdf (Page 4)

mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not afﬁliated with GE.

GEIT-20040EN (11/12)

Documentation and recording

• Store & preview a minimum of 200 user-named data sets

with A-Scans for quick recall and instrument setup.

• UltraDOC 4 software program for bi-directional

communication with a PC for

easy storage of data sets with

A-scan and documentation of

test results.

• UltraMATE™ software program

simpliﬁes the transfer, storage,

analysis, and documentation

of thickness data.

•

Reports with A-Scans are output

directly to a variety of

printers.

• Alphanumeric Thickness Datalogger for ﬂexible, convenient

storage of thickness readings in Linear, Grid, or Custom-

Linear ﬁle structures with user-input ﬁlenames, location

I.D.’s, notes, memo, & header ﬁelds.

Range USN 60 0.040” to 1100” (1 mm to 28 m) at steel velocity;

range selectable in ﬁxed steps or continuously

variable

Range USN 60L

range is 0.040” to 480” (1 mm to 12 m)

Material Velocity Continuously adjustable from 0.0098 to

0.6299 inches/μs (250 to 16,000 m/s);

65 selectable material velocities

Display Delay -20 to 3498 μs in steel (dependent on range)

Probe Delay/

Zero Offset

0 to 999.9 μs

Damping 50, 75, 150, 500 ohms

Gain 0 to 110 dB adjustable in selectable steps 0.1, 0.5,

1.0, 2.0, 6.0, user deﬁnable, and locked

Test Modes Pulse echo, dual, and thru-transmission

Pulser Square wave excitation pulse

Pulse Voltage

(Square wave pulser

mode)

50 to 450 V scrollable in 10 V adjustments

Pulse Width (Square

wave pulser mode)

Tunable from 50 to 1000 ns in 10 ns adjustments

Pulse Energy

(Spike mode)

Low, High

Pulse Repetition

Frequency USN 60

Autolow, autohigh, manually adjustable from 15 to

6000 Hz (spike mode) and 15 to 2000 Hz in square

wave mode, in 5 Hz increments, external trigger

(spike mode only)

Pulse Repetition

Frequency USN 60L

Limited to 2000 Hz in both spike and square wave

mode

Bandwidth

(ampliﬁer bandpass)

0.25 to 25 MHz with 10 selectable settings including

broadband

Gate Monitors Two independent ﬂaw gates controllable over entire

sweep range

Measurement Modes Zero-to-ﬁrst, multi-echo with selectable ﬂank or

peak detection

Rectiﬁcation Positive halfwave, negative halfwave, fullwave, RF

Reject (suppression) 0 to 80% linear

Units Inch, millimeter, or microsecond selectable

Operating

Temperature

-20° to 55°C (-4° to 130°F);

-25° to 70ºC (-13° to 158 º F ) storable

Languages Selectable English, German, French, Spanish, Italian,

Portuguese, Norwegian, Swedish, Finnish, Danish,

Dutch, Russian, Czech, Romanian, Slovakian

Probe Connectors BNC or Lemo selectable at order

Keypad International symbols

Battery Power Lithium Ion battery pack;

NiMH, NiCad or alkaline cells substitutable

Battery Life 11 hours on Li-Ion battery pack

Size 11.1” W x 6.75” H x 6.25” D (282 x 171 x 159 mm)

Display 640 x 480 pixels Color LCD 132.48 x 99.36 mm

Weight 6.6 lbs. (3.0 kg) Li-Ion battery;

3.5 lbs.(1.6 kg) without battery

Color Leg Easy identiﬁcation of leg and skip distances for

angle beam inspection in A-scan or grid

background colors

Weld Rating

Calculation

Simpliﬁes the rating of weld indications according

to AWS speciﬁcation D1.1, (formula D=A-B-C)

Warranty 2 year conditional warranty on parts and labor;

free 2nd year contingent upon return of unit within

13 months of purchase for recertiﬁcation

Dust Proof/

DrippingWater Proof

As per IEC 529 speciﬁcation for IP54 classiﬁcation

Compliance EMC/EMI: EN 55011:2007, EN 61000-6-2:2005

Ultrasound: EN 12668, ASTM E317

Options

DAC / TCG Option

Multiple Curve DAC (Distance Amplitude Curve)/ TCG (Time Corrected

Gain) for echo amplitude adjustment and evaluation, 40 dB dynamic

range, 12 dB/μs slope, record up to 16 points, recorded points are

individually editable, new points can be inserted. Display four

additional curves based upon dB offset feature from originally

recorded DAC curve. TCG attenuation and transfer correction

features enable use on other materials and surface conditions.

IF (Interface) Gate Option

For automatic start of the display, Gate A, Gate B, and / or DAC / TCG

for immersion testing applications.

DGS Option

Displays a curve for a particular equivalent reﬂector size as a

function of the distance from the probe to the reﬂector for 25

narrowbanded probes. The ERS (Equivalent reﬂector size) function

automatically calculates the corresponding equivalent reﬂector

diameter in mm or inches for any echo in the measurement gate.

BEA Backwall Echo Attenuator Option

Allows independent gain control of the region under Gate B for

backwall echo monitoring.

VGA Output Option*

Provides an easy way to connect to a PC monitor or PC projector for

viewing by large audiences or training purposes.

RF Output Option*

Outputs the raw RF waveform via a standard Lemo #00 connector

for further analysis.

HiSPD High Speed Digital Output Option

Outputs amplitude or thickness values 20 times faster than RS 232

port.

* Order with new instrument only. Later upgrade not possible.

www.ge-mcs.com

Technical Speciﬁcations

USN 60 / USN 60L

1 2 3 4

Comments to this Manuals

No comments

GE USN 60 Brochure Page 4

Comments to this Manuals

Related products and manuals for Unknown GE USN 60