GE JVM3162DJBB Installation Manual download pdf (Page 12)

Place the mounting plate against the wall and insert

the toggle wings into the holes in the wall to

mount the plate.

NOTE: Before tightening toggle bolts and wood screw,

make sure the tabs on the mounting plate touch the

bottom of the cabinet when pushed

flush against the wall and that the plate is properly

centered under the cabinet.

CAUTION: Be careful to avoid

pinching fingers between the back of the

mounting plate and the wall.

Tighten all bolts. Pull the plate away from the wall to

help tighten the bolts.

ATTACH THE MOUNTING PLATE

TO THE WALL

A1.

OUTSIDE TOP EXHAUST

(Vertical Duct)

Attach the plate to the wall using toggle bolts. At least

one wood screw must be used to attach the plate to a

wall stud.

Remove the toggle wings from the bolts.

Insert the bolts into the mounting plate

through the holes designated to go into drywall and

reattach the toggle wings to

/4” onto each bolt.

INSTALLATION OVERVIEW

A1. Attach Mounting Plate to Wall

A2. Prepare Top Cabinet

A3. Install Adapter

A4. Mount Oven

A5. Adjust Exhaust Adaptor

A6. Connect Ductwork

Wall

Mounting

Plate

Spacing for

Toggles More Than

Wall Thickness

Bolt End

Toggle

Bolt

Toggle Wings

To use toggle bolts:

Installation Instructions

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Comments to this Manuals

No comments

GE JVM3162DJBB Installation Manual Page 12

Comments to this Manuals

Related products and manuals for Unknown GE JVM3162DJBB