GE GPF825W Installation Manual download pdf

BEFORE YOU BEGIN

Read these instructions completely

and carefully.

IMPORTANT – Save these instruc-

tions for local inspector’s use.

IMPORTANT – Observe all governing

codes and ordinances.

Note to Installer – Be sure to leave these

instructions with the Consumer.

Note to Consumer – Keep these instructions

with your Owner’s Manual for future

reference.

Installation

Instructions

1/4" Custom Dishwasher

Door Panel Kit

GPF825 Series Kits

GPF825B-Black Trim Kit,

GPF825C-Bisque Trim Kit, GPF825W-White Trim Kit

TOOLS AND MATERIALS REQUIRED:

• Stubby Phillips screwdriver

• Gloves to protect against sharp edges

• Safety glasses

KIT INCLUDES:

• Door panel frame

• 2 Door springs

STOP

1 CUT 1/4" THICK CUSTOM

PANEL TO SIZE

• Cut door panel to the dimensions shown in

Figure 1.

NOTE: The trim provided will conceal the cut

edges of the panel.

Fully Assembled Door Panel Frame

2 Door Springs

To Be Used On All Models

Except PDW8500

Figure 1

WARNING:

To prevent electric shock, disconnect electri-

cal power supply to dishwasher before

changing panels. Do not operate dishwasher

while changing panel.

CAUTION:

On new installations, do not remove wood

base until you are ready to install the dish-

washer. The dishwasher will tip over when

the door is opened.

Adjustable

Steel Panel

Top

Trim

Side Trim

Bottom

Trim

1/4" Thick

Door Panel

23-1/2"

25-1/16"

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - Instructions

BEFORE YOU BEGINRead these instructions completelyand carefully.IMPORTANT – Save these instruc-tions for local inspector’s use.IMPORTANT – Observe al

Page 2 - 2 REMOVE DOOR PANEL

2 REMOVE DOOR PANEL2Figure 2Figure 3• Open dishwasher door.• Remove the 6 Phillips head screws along thesides of the door (Figure 2) holding the inne

Page 3 - 5 REPLACE DOOR SPRINGS

IncreaseSpringTensionDecreaseSpringTensionInsert LongHook OverFrame BracketCORRECTINCORRECTPulleyShoulderEscutcheonEscutcheonSlotBottomPhillips Screws

Page 4 - 5A TEST DOOR BALANCE

5A TEST DOOR BALANCEPub. No. 31-30552 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE DWG. NO. 206C1559P091(ND 923-20) 2/04• Release door latch. Open

Page 5 - Instrucciones

Panel de puerta con espesor de 1/4 de pulg. (6 mm)23-1/2 pulg. (60 cm)25-1/16 pulg.(64 cm)ANTES DE COMENZARLea cuidadosamente todas estasinstrucciones

Page 6 - 2 RETIRE EL PANEL DE PUERTA

Desliceel paneldentro delbastidorVista enplantaPanelpersonalizado2 RETIRE EL PANEL DE PUERTA2Figura 2Figura 3• Abra la puerta del lavavajillas.• Saqu

Page 7 - 4 INSTALE EL PANEL ARMADO

TornillosPhillips inferiores5 REEMPLACE LOS RESORTES DE LA PUERTA4 INSTALE EL PANEL ARMADOFigura 7Figura 8Figura 9PASO 5 EN TODOS LOS MODELOS EXCEPT

Page 8 - (ND 923-20) 2/04

5A PRUEBE EL BALANCE DE LA PUERTAPub. No. 31-30552 ESPECIFICACIONES SUJETAS A CAMBIO SIN PREVIO AVISO DWG. NO. 206C1559P091(ND 923-20) 2/04• Suelte e

Comments to this Manuals

No comments

GE GPF825W Installation Manual

Browse online or download Installation Manual for Unknown GE GPF825W. GE GPF825W Get installation instructions User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown GE GPF825W