GE 45602 Installation Guide download pdf (Page 4)

There are no user serviceable parts in this unit.

To reduce the risk of electric shock, this product has a grounding

type plug that has a third (grounding) pin. This plug will only ﬁt into a

grounding type power outlet. If the plug does not ﬁt into the outlet,

contact a qualiﬁed electrician to install the proper outlet. Do not

change the plug in any way.

RISK OF FIRE

RISK OF ELECTRICAL SHOCK

RISK OF BURNS

WARNING

The Load-Sense feature on

this Z-Wave product will turn

the power to the connected

device ON when a change in the load is detected. Z-Wave

connected devices should always be unplugged before performing

any service or maintenance of the devices.

Controlling Appliances:

Exercise extreme caution when using Z-Wave devices to control

appliances. Operation of the Z-Wave device may be in a different

room than the controlled appliance, also an unintentional activation

may occur if the wrong button on the remote is pressed. Z-Wave

devices may automatically be powered on due to timed event

programming. Depending upon the appliance, these unattended

or unintentional operations could possibly result in a hazardous

condition. For these reasons, we recommend the following:

1. Assign Z-Wave controlled appliances to device numbers 10 – 18

on the GE remote. The likelihood of unintentionally turning on the

appliance will be reduced signiﬁcantly because the “Shift” button

will need to be pressed before pressing device numbers 10-18.

2. Z-Wave devices controlling appliances should be removed from

“All” control setting. Instructions on how to do this are included in

the manual for your GE remote.

3. Do Not include Z-Wave devices in Groups or Scenes if they

control appliances.

1 2 3 4 5 6 7 8 9 ... 15 16

No comments

GE 45602 Installation Guide Page 4