GE Simon 60-875 User Manual download pdf (Page 19)

Simon Security System 14

Note

Codes are always needed to

disarm the system. Depend-

ing on the panel configura-

tion, codes may be needed

to arm the system. Check

with the installer for your

system configuration.

Your system may be set up so that the master code or an access code is required when

arming. If so, the panel will prompt you to enter a code when you attempt to arm the

system.

Note

Because different codes can be entered using the same button presses you have to use

caution when programming the panic code. You need to ensure that the panic code does not

use the same button presses as other access codes. For example if the master code is

1234, do not program the panic code to be 2244. The panel would interpret these codes to

be the same code.

¾How to change an Access Code:

1. Open the cover of the panel.

2. The panel voice prompts you to Use numbered keys to enter ID. Enter your mas-

ter access code using the numbered keys.

3. The panel voice prompts you to Please select from START MENU. Press the Add

button on the START MENU.

4. The panel voice prompts you to Select from MAIN MENU. Press the Access

Code button on the MAIN MENU.

5. The panel voice responds with Master Code, press again for next access code,

DONE to select or press CANCEL to quit. Press the access code button again to

hear the next access code. When you hear the access code you wish to change

press the DONE Button.

6. Enter 3-6 new numbers using the numbered keys. (Access Code length is pro-

grammed by the installer.)

7. Close the panel cover.

¾

How to Delete an Access Code:

1. Open the cover of the panel.

2. The panel voice prompts you to Use numbered keys to enter ID. Enter your mas-

ter access code using the numbered keys.

3. The panel voice prompts you to Please select from START MENU. Press the

Delete button on the START MENU.

4. The panel voice prompts you to Select from MAIN MENU. Press the Access

Code button on the MAIN MENU.

5. The panel voice responds with Access Code 1, press again for next access code,

DONE to select or press CANCEL to quit. Press the access code button again to

hear the next access code. When you hear the access code you wish to delete,

press the DONE Button. The panel voice responds with Access Code X deleted.

6. Close the panel cover.

Light Control

You system has the ability to control lights from the panel. A specific light or group of

lights can be programmed to turn on and off at designated times.

House Code

Refers to a group of lights that can be controlled from the panel.

Note

The panel lists house codes A - O. Ask your installer what house code your lights are set up

on. Your house code for lights is ___.

Delete Access Code

Delete

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Comments to this Manuals

No comments

GE Simon 60-875 User Manual Page 19

Comments to this Manuals

Related products and manuals for Security access control systems GE Simon 60-875