Ge RM24927 User Manual download pdf (Page 6)

1110

Using Your Remote

Code Identification

The Code Identification Feature allows you to

identify the four digit library code stored under your

device button. For example, if you want to find out

what four digit code is stored under your TV device

button, follow the six steps below:

1. Press and hold the CODE SEARCH

button until the red indicator stays on.

Release the CODE SEARCH button.

2. Press and release the desired device

button (TV, VCR, etc.). The red

indicator blinks, then stays lit.

3. Press and release the CODE SEARCH

button. The red indicator blinks once

and remains lit.

4. To find the first digit for

the code stored under

the device button

pressed in step 2,

press each numeric

button from 0-9 in

turn. The number that

causes the indicator

light to blink is the

first digit in your code.

5. To find the second digit, repeat step 4.

6. Repeat step 4 to find the third and fourth digit.

This time the red indicator turns off and stays off.

Code Search

If your device does not respond after you have tried

all the codes for your brand, or if your brand is not

listed, try searching for your code by following these

steps.

1. Manually turn on the device (TV, VCR, etc.) to be

controlled.

2. Press and hold the CODE SEARCH

button until the red indicator stays on,

then release the CODE SEARCH button.

3. Press and quickly release the desired

device button (TV, VCR, etc.). The red

indicator blinks off once.

4. Press the ON•OFF button

repeatedly (up to 300 times) until

the device to be controlled turns off.

The red indicator blinks off with each

button press.

Most users will store VCR codes under the VCR button,

Cable codes under CABLE, etc. If (for example) you

want to store a VCR code under CABLE, first follow the

procedure for Direct Code Entry (previous page) and

press CABLE in step 2 of Direct Code Entry, then enter

ANY VCR code in step 3 of Direct Code Entry. Then

follow the steps above for Code Search.

Note: Code Search starts from the currently stored

four digit number under that mode. Sometimes the

first code that “works” with your device may only allow

limited functionality (e.g. the MENU button might not

work). There may be a code that performs more

functions. Continue the code search process until the

best code is found.

5. Press and release ENTER to install the

code.

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Ge RM24927 User Manual Page 6

Comments to this Manuals

Related products and manuals for Remote control Ge RM24927