Ge 24970 GE Universal Remote User Manual download pdf (Page 10)

Code Search

If your device does not respond after you have

tried all the codes for your brand, or if your brand is

not listed, try searching for your code by following

these steps.

1. Manually turn on the device (TV, VCR, etc.) to

be controlled.

2. Press and hold the CODE SEARCH

button until the red indicator stays

on, then release the CODE SEARCH

button.

3. Press and quickly release the desired

device button (TV, VCR, etc.). The

red indicator blinks off once.

4. Press the ON•OFF button

repeatedly (up to 300 times) until

the device to be controlled turns

off. The red indicator blinks off with

code.

Most users will store VCR codes under the VCR button,

Cable codes under CABLE, etc. If (for example) you

want to store a VCR code under CABLE, rst follow the

procedure for Direct Code Entry (previous page) and

press CABLE in step 2 of Direct Code Entry, then enter

ANY VCR code in step 3 of Direct Code Entry. Then fol-

low the steps above for Code Search.

Note: Code Search starts from the currently stored four

digit number under that mode. Sometimes the rst code

that “works” with your device may only allow limited

functionality (e.g. the MENU button might not work).

There may be a code that performs more functions.

Continue the code search process until the best code is

each button press.

5. Press and release ENTER to install the

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

No comments

Ge 24970 GE Universal Remote User Manual Page 10