Ge ZFGP21HZSS User Manual download pdf (Page 7)

Installation Instructions

NOTE: To prevent damage, leave inside

packaging, door spacer and outside

protective wrap in place until the unit

is moved to the installation location.

STEP 3 INSTALL THE REFRIGERATOR

BEFORE MOVING REFRIGERATOR

INDOORS

IMPORTANT: Doors and passageways

into the installation location require a 31" min. opening.

If the opening is less than 31", the top cap, doors

and drawers must be removed. (See steps 4–6.)

NOTE: Skip steps 4–6 if door removal is not required.

Go to page 9, Move The Refrigerator.

TOP DRAWER

STEP 4 REMOVE THE FREEZER

DRAWERS

The freezer drawers can be removed, if needed,

to fit through tight areas.

Read these instructions completely and carefully.

REMOVE THE BASKET

A. Open the freezer drawer until it stops.

B. Cut the 2 wire ties off of the basket with wire cutters.

C. Lift the front end of the basket so that the front two

alignment tabs come out of the slide bracket first.

D. Then rotate the front edge of the drawer up while

lifting the remaining two rear alignment tabs

out of the slide bracket. Pull the basket

up and out of the drawer.

REMOVE THE TOP DRAWER FROM THE SLIDES

A. Remove the 8 hex head screws from the door

and remove the door.

B. Set the drawer front on a non-scratching surface.

C. Push the rail assemblies back into the cabinet.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

Ge ZFGP21HZSS User Manual Page 7