Ge ZFGP21HZSS User Manual download pdf (Page 14)

STEP 17 REMOVE PACKAGING

START ICEMAKER

A. Remove all tape, foam and protective packing from

shelves and drawers.

B. Remove the tie downs from the freezer baskets.

Set the icemaker power switch to the I (on) position.

The icemaker will not begin to operate until it reaches

its operating temperature of 15°F (–9°C) or below. It will

then begin operation automatically. It will take 2–3 days

to fill the ice bin.

NOTE: In lower water pressure conditions, the water

valve may turn on up to 3 times to deliver enough water

to the icemaker.

STEP 18 TEMPERATURE CONTROLS

• The temperature controls are preset at 37°F

for the refrigerator and 0°F for the freezer.

• Allow 24 hours to stabilize before making adjustments.

STEP 16 INSTALL TOEKICK

• Press toekick into position and reinstall one screw on

each side.

IMPORTANT: The vented toekick must

remain un ob struct ed for proper air circulation.

Power Switch

Toekick Screw

Installation Instructions

1 2 ... 9 10 11 12 13 14 15 16

No comments

Ge ZFGP21HZSS User Manual Page 14