Ge ZDIS150ZSS User Manual download pdf (Page 4)

Installation Instructions

CABINET

120°

110°

3/4”

Custom Panel Installation, Top View

Corner Installation

1-1/2”-wide filler

panel or cleat set

back even with

front of case.

CABINET

1/2”-wide filler

panel or cleat set

back even with

front of case.

120°

110°

Flush Installation, Top View

ADVANCE PLANNING

CAUTION: Due to excessive weight, TWO

PEOPLE ARE REQUIRED TO MOVE AND INSTALL THIS

Ice maker. Failure to do so can result in back or other

injury.

MISE EN GARDE :

A cause de son poids élevé, IL FAUT DEUX

PERSONNES POUR DÉPLACER ET INSTALLER CETTE

MACHINE À GLAÇONS. Le non-respect de ces

instructions peut causer des blessures au dos ou

d’autre nature.

* For flush installation of ZDIS150 and ZDIC150 models: Install

a 1/2”-wide filler strip on the hinge side. The filler strip will act

as a spacer between the door case and adjacent cabinets and

will prevent interference with the cabinet door swing. Recess

the filler strip 1” back from the front face of the ice maker, or

even with the front edge of the product case. The width of the

opening must be 15-1/2” (including the 1/2” filler strip).

** The black model ZDIC150 with a custom panel cannot

be installed flush. A 1-1/2”-wide filler strip is required on the

hinge side. The ice maker will project forward 3/4” of adjacent

cabinets. Recess the filler strip 1-3/4” back from the front face

of the ice maker or even with the front edge of the product

case. The width of the opening must be 16-1/2” wide, including

the 1-1/2” filler strip.

CUTOUT & PRODUCT DIMENSIONS

CUTOUT & PRODUCT DIMENSIONS (Cont.)

Cutout dimensions shown allow for a full door swing.

1 2 3 4 5 6 7 8 9 ... 17 18

Comments to this Manuals

No comments

Ge ZDIS150ZSS User Manual Page 4

Comments to this Manuals

Related products and manuals for Refrigerators Ge ZDIS150ZSS