Ge GBC12IAX User Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 68
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
TOOLS YOU WILL NEED
Installation Instructions
REVERSING THE DOOR SWING
IMPORTANT NOTES
When reversing the door swing:
Read the instructions all the way through before
starting.
Handle parts carefully to avoid scratching paint.
Set screws down by their related parts to avoid
using them in the wrong places.
Provide a non-scratching work surface
for the doors.
IMPORTANT: Once you begin, do not move the
cabinet until door-swing reversal is completed.
These instructions are for changing the hinges from
the right side to the left side—if you ever want to
change the hinges back to the right side, follow
these same instructions and reverse all references
to left and right.
Unplug the refrigerator from its electrical outlet.
Empty all door shelves, including the dairy
compartment.
Thin-blade Screwdriver
Masking Tape
Adjustable Wrench 10 mm Socket Ratchet/Driver
REMOVE THE REFRIGERATOR DOOR
Tape the door shut with masking tape.
Using a Phillips screwdriver, remove the
electronics box cover screws on the flanges
toward the back of the refrigerator.
Using a Phillips screwdriver, remove the hinge
cover screws. Lift up the front of the electronics
box cover to lift off the hinge cover. DO NOT
remove the electronics box cover. There will be
a wire harness connection to the hinge cover.
Do not disconnect. Place the hinge cover on
the top of the refrigerator, being careful not
to pinch or damage any wires.
Using a Phillips screwdriver, remove the door
cap screws. Lift the cap off of the door.
Using a 10 mm socket ratchet/driver, remove
the hex screws securing the top hinge. Lift
the hinge straight up to free the hinge from
the socket in the top of the fresh food door.
1
A
B
C
D
Electronics
Box Cover
Phillips Screwdriver
10
E
Screws
Screws
Hinge
Cover
Screw
Screw
Door Cap
Hex Screws
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 67 68

Comments to this Manuals

No comments