Ge EER3000 User Manual download pdf (Page 2)

TOOLS YOU WILL NEED

FOR YOUR SAFETY:

All rough-in and spacing dimensions must be

met for safe use of your range. Electricity to

the range can be disconnected at the outlet

without moving the range if the outlet is in

the preferred location (remove lower drawer).

To reduce the risk of burns or fire when

reaching over hot surface elements, cabinet

storage space above the cooktop should be

avoided. If cabinet storage space is to be

provided above the cooktop, the risk can

be reduced by installing a range hood that

sticks out at least 5” beyond the front of the

cabinets. Cabinets installed above a cooktop

must be no deeper than 13”.

Be sure your appliance is properly installed

and grounded by a qualified technician.

Make sure the cabinets and wall coverings

around the range can withstand the temperatures

(up to 200°F.) generated by the range.

2

Installation Instructions

PREPARE TO INSTALL THE RANGE

MATERIALS YOU MAY NEED

Anchor SleevesLag Bolts

(For Anti-Tip Bracket Mounted

on Concrete Floors Only)

3-Wire Cord

4‘ Long

4-Wire Cord OR

4‘ Long

(UL Approved 40 AMP)

Adjustable Wrench

Level

1/4” Nut Driver

Phillips Screwdriver

Drill with 1/8” Bit

Pencil

Safety Glasses

Tape Measure

Pliers

Flat-blade

Screwdriver

PARTS INCLUDED

Anti-Tip Bracket Kit

REMOVE SHIPPING MATERIALS

Remove packaging materials. Failure to

remove packaging materials could result

in damage to the appliance.

1

Squeeze Connector

(For Conduit

Installations Only)

Tin Snips

1 2 3 4 5 6 7 ... 11 12

Comments to this Manuals

No comments