GE SBSD137HWW Owner's Manual

Browse online or download Owner's Manual for Insulated compact pedestals GE SBSD137HWW. GE SBSD137HWW User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Installation
Instructions
KIT CONTENTS
4 Support Pads
4 Mounting Screws
Drawer Divider
1
SBSD137, SBSD227
TOOLS YOU WILL NEED
Phillips Head
Screwdriver
9/16 Open End Wrench
or Adjustable Wrench
8 mm Socket Wrench
REMOVE THE LEVELING LEGS
Carefully lay the washer or dryer on its
side to access the leveling legs on the
bottom of the appliance.
IMPORTANT: Do not lay the washer or dryer
on its back! Do not remove the shipping
bolts on the back side of the washer. The
bolts must remain in place until the washer
is returned to an upright position.
Use an open-end wrench to remove the
washer or dryer leveling legs.
B
A
1
INSTALLATION PREPARATION
Remove the packaging.
The Drawer divider is taped at the top of the
shipping carton. Remove the divider and set
aside for final installation.
Flatten the product carton to use as a pad
to lay the washer or dryer down on its side.
Continue using the carton to protect the finished
floor in front of the installation location.
Back out and remove
all 4 leveling legs
Instructions en français : . . . . . . . . . . . .4
Instrucciones en español: . . . . . . . . . . .8
For Washer Models: GBVH5140, GBVH6260, GCVH6260, GCVH6600, GHDVH626,
GHDVH670, WBVH5100, WBVH6240, WCVH6260, WCVH6600, WHDVH626
and WHDVH660
For Dryer Models: DBVH510, DBVH512, DCVH515, DCVH660, DHDVH52,
DHDVH66, PBVH415, PCVH565, PDVH515, PHDVH52 and PHDVH57
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
IMPORTANT Save these
instructions for local inspector’s use.
IMPORTANT Observe all
governing codes and ordinances.
Note to Consumer – Keep these
instructions with your Owner’s Manual
for future reference.
Completion time – 1 to 2 hours
Proper installation is the responsibility
of the installer.
Product failure due to improper installation
is not covered under the Warranty.
CAUTION — Due to the size and
weight of these products, and to reduce the
risk of personal injury or damage to the
product, TWO PEOPLE ARE REQUIRED FOR
PROPER INSTALLATION.
See washer and dryer installation
instructions for additional installation
requirements and guidelines.
Page view 0
1 2 3 4 5 6 ... 11 12

Summary of Contents

Page 1 - Instructions

InstallationInstructionsKIT CONTENTS4 Support Pads4 Mounting ScrewsDrawer Divider1SBSD137, SBSD227TOOLS YOU WILL NEEDPhillips Head Screwdriver9/16″ Op

Page 2 - Installation Instructions

10Instrucciones para la instalaciónNIVELE LA LAVADORA O SECADORABusque las cuatro patas del paquete de piezas e instálelas.Enderece la lavadora o seca

Page 3

11Instrucciones para la instalaciónRETIRE LOS TORNILLOS DE ENVÍORetire los 4 tornillos de envío en la parteposterior de la unidad.6VUELVA A INSTALAR E

Page 4

12Printed in ChinaImprimé en ChineImpreso en China49-90321175D1807P58902-07 JR

Page 5 - Instructions d’installation

2Installation InstructionsINSTALL THE PEDESTALTO THE WASHER OR DRYERPlace the pedestal against the bottom of the unit. Check to be sure the drawerfron

Page 6

3Installation InstructionsLEVEL THE WASHER OR DRYERLocate the 4 legs from the parts packageand install.Stand the washer or dryer upright. Moveit close

Page 7

Instructionsd’installationCONTENU DE LA TROUSSE4 coussinets de support4 vis de montageSéparateur de tiroir4AVANT DE COMMENCERLisez attentivement et en

Page 8 - Instrucciones

5Instructions d’installationPRÉPAREZ LE SOCLETirez le tiroiraussi loin quepossible.Retirez les visdes glissièresde tiroir.Glissez etsortez le tiroirde

Page 9 - NIVELADORAS

METTEZ LA LAVEUSE ET LA SÉCHEUSE À NIVEAUTrouvez les 4 pieds dans le paquet de pièceset installez.Relevez la laveuse ou la sécheuse.Rapprochez l’appar

Page 10

RÉINSTALLEZ LE TIROIRVérifiez pourvous assurerque lesglissières sontfermées.Glissez le tiroirdansl’ouverture.Alignez lessupports dutiroir avec lesglis

Page 11 - Divisor

Instruccionespara la instalaciónCONTENIDO DEL KIT4 planchuelas de soporte4 tornillos de montajeDivisor de cajón8ANTES DE COMENZARLea atenta y completa

Page 12

9Instrucciones para la instalaciónPREPARE EL PEDESTALJale el cajónhacia fuerahasta que hagatope.Retire lostornillos de las correderasdel cajón.Deslice

Comments to this Manuals

No comments