GE GTR12 User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 36
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
Installation Instructions
11
INSTALL CENTER HINGE
ON THE LEFT
Remove the three plug buttons on the left side and
install them on the right. Remove the mullion screw on
the left side with a Phillips screwdriver and install on
the right.
Install the center hinge on the left side with the screws,
spacer and washer(s) (on some models) that you
removed in Step 2.
Remove the tape holding the door shut.
CAUTION:When assembled correctly,
the hinge is tight against the cabinet.
ATTENTION: The screws must be properly tightened.
Turn the screws until snug. Then tighten the screws a
minimum of 1/2 turn using both hands.
6
REHANG THE FREEZER DOOR
With a flat blade screwdriver, remove the plug button
from the left side (top of door) and install on the right.
Place the freezer door on the center hinge over
the pin.
Raise the top hinge by hand and insert the top
hinge pin into the hole in the door. Then swing
the door shut.
7
ALIGN THE DOORS
Align the freezer door with the fresh food door so that
the gap between the doors is even.
Tighten the top hinge screws by turning them until
snug. Then turn the screws a minimum of 1/2 turn
using both hands.
Install the hinge cover over the top hinge.
8
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Comments to this Manuals

No comments