Ge DNSB514 User Manual download pdf (Page 16)

Operating Instructions Safety InstructionsConsumer Support Troubleshooting Tips

Reversing the Door

Tools needed:

■

Standard #2

■

Tape-tipped

Phillips screwdriver putty knife

Open the door and remove the filler plugs opposite the hinges. With the

door completely open, remove the bottom screw from each hinge on the

dryer face. Insert these screws about halfway into the

TOP

holes, for each

hinge, on the opposite side (where you removed the filler plugs).

Apply firm pressure to get the screw started in new holes.

Loosen top screw from each hinge on the dryer face halfway. With one hand

holding the top of the door and the other hand holding the bottom, remove

the door from the dryer by lifting it

and

OUT.

Rotate the door 180°. Insert it on the opposite side of the opening by moving

the door

and

DOWN

until the top hinge and the bottom hinge are resting

on the top screws inserted in step 1.

Remove the remaining screws from the side of the opening from which

the door was removed. With these screws secure each hinge at the bottom.

Tighten the two top screws of each hinge. Reinsert the plastic plugs on the

side from which the door was removed.

About reversing the door.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

Ge DNSB514 User Manual Page 16