Ge Panel C GFK-2251 User Manual download pdf (Page 39)

GFK-2251 Chapter 4 Connectors and Cabling 4-9

2.95"

(75 mm)

19.00"

(483 mm)

.250"(6.35 mm) dia. (QTY.2)

Mounting

Surface

4.25"

(108 mm)

18.31"

(465 mm)

(Six cable clamps included with assembly.)

Cable Clamp

Spacing Requirements

Side View with

Front View with Mounting Dimensions

* Additional cable clamps available (12 per package), catalog number IC697ACC737.

Figure 4-5. Ground Plate Outline, Mounting Dimensions, and Cable Clamp

The ground plate should be mounted near the unit. The cable clamp provides mechanical

relief as well as electrical grounding. A typical installation is shown in Figure 4-6.

The cable clamp attaches to the ground plate by sliding it into two adjacent slots at the

selected location for the cable. The cable is inserted between the ground plate and the

cable clamp after removing the required section of the cable’s outer cover. Tighten the

cable clamp by turning the thumbscrew clockwise. Do not over-tighten the thumbscrew—

hand-tighten or tighten lightly with a tool.

Note: If you are installing the ground plate on a painted surface, the paint must be

removed where the ground plate is to be mounted to ensure a good ground

connection between the plate and mounting surface.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 61 62

No comments

Ge Panel C GFK-2251 User Manual Page 39