HO97916 USB 2.0 7-Port Hub IINNSSTTRRUUCCTTIIOONN MMAANN
C. Attach Hub to Stand Vertically 1. Line up the tracks of either side of the hub with the rails on the stand. 2. Sli
D. Attach Hub to Stand Horizontally 1. Line up the hooks on the bottom of the hub with the hub clips on the stand. 2. Slide t
E. Stacking Hubs 1. Face the Hubs in the same direction 2. Line up the hooks on the bottom of Hub A with the top cover of Hub B. 3. Slide Hub A
VI. Hardware Installation 1. Make sure your computer has all the necessary updates required to support USB 2.0. These can be found on Microsoft’s we
3. Plug the included AC power adapter into the Power Jack on the rear of the USB 2.0 7-Port hub. 4. Plug the AC power adapter into a standard elec
VII. Software Installation Software installation is only required for Windows 98 and 98 SE users. Users of all other Operating Systems, including Win
VIII. Troubleshooting • Hub Not Seen Make sure you have installed all Windows updates and patches pertaining to USB. These are available on Microso
IX. Technical Specifications USB Hub: 7 Ports Standards: USB 1.1 and 2.0 Compatible Operating Systems: Windows 98 SE, ME, 2000, XP or later
X. FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of t
XI. Warranty Jasco Products Company warrants this product to be free from manufacturing defects for a period of two years from the original date of co
Table of Contents I. INTRODUCTION 3 II. OVERVIEW 4 III. SAFETY INSTRUCTIONS 5 IV. POWER MODE SETTING 6 V. SOFTWARE INSTALLATION VI. HUB STAND
I. Introduction Please read this entire manual carefully before using your new USB 2.0 7-Port Hub and follow the instructions to prevent damage to
II. Overview This USB 2.0 7-Port Hub allows you to connect up to seven USB devices to a single USB port on your computer, including up to five high-po
III. Safety Instructions Always read the Safety Instructions carefully. Keep this user’s manual for future reference. Keep this equipment away
IV. Power Mode Setting There are two power mode options for the USB 2.0 7-Port Hub. The first is self-power mode (recommended), which requires the
V. Hub Stand Assembly Options: • Stand may be mounted Magnetically or with Screws • Hub may be oriented vertically or horizontally • Hubs may be s
A. Attach Hub Stand with Magnets 1. Place the metal magnet holder, and magnet on the stand as shown in the diagram. 2. Using the included scre
B. Attach Hub Stand with Screws 1. You will need to purchase two screws separately. These are not provided. 2. Place the stand where you would
Comments to this Manuals