Ge DIGITAL CAMERA J1470S User Manual download pdf (Page 69)

66 67

Transmission

Connecting to a PC

You can connect to the PC by using the USB interface on the

camera or the USB cable. Once connected you can manually

transfer the les or use software such as Arcsoft (included on

disc).

Setting the USB mode

Since the camera’s USB port can be set to connect with either

a PC or a Printer, the following steps will allow you to ensure

that the camera is correctly congured to connect with a PC.

1. Enter the camera setup menu and select USB Mode with

the UP/Down button, then press the or the Right button

to enter.

2. Use the

Up/Down navigation buttons to select PC.

3. Press the button to conrm the setting.

Transferring les to your PC

The computer will automatically detect the camera as a

removable drive. Double click on My Computer (or Computer)

to access your computer drives. Locate the removable drive,

browse the directory to locate your les and copy the folders/

les as you normally do on a computer.

To use the Arcsoft software to transfer les to your computer,

please connect the camera to the computer and follow these

steps:

1. Start a computer to which ArcSoft software has been

installed.

2. Make sure both the camera and PC are turned on.

3. Connect the camera with PC:

• Connect USB interface of the camera with PC;

• connect one end of attached USB cable with the camera,

and connect another end with PC.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 84 85

No comments

Ge DIGITAL CAMERA J1470S User Manual Page 69