86
Connecting to your Printer
1. Make sure both the camera and printer are
turned on.
2. Connect one end of the supplied USB cable to
the USB port on your camera.
3. Connect the other end of the cable to the USB
port on the printer.
If the camera is not connected to a PictBridge
compatible printer, the following error message
will appear on the LCD screen.
The error message above will also appear
if the USB mode is set incorrectly, in which
case you should disconnect the USB cable,
check the USB mode settings, ensure that
the Printer is turned on, and then try
connecting the USB cable again.
Comments to this Manuals