Ge Triplex DVMRe 4eZT User Manual download pdf (Page 74)

0150-0198H 74 DVMRe Triplex eZ

8.5 Event Actions

All Event messages will be ignored while an Alarm condition exists in the DVMRe.

No Event Change – 0000 0000b

If both the start and stop bits are clear, there will be no change to the event status. The camera’s

record rate will not be changed.

Start Event – 0000 0001b

If only the start bit is set, an event will be initiated on the selected camera. This will cause the selected

camera, as well as any pre-event video to be recorded at the Event Record Rate.

Stop Event – 0000 0010b

If only the stop bit is set, the current event on the selected camera will be terminated. This will start

the post-event timer after which, the selected camera will resume recording at the normal record rate.

Momentary Event – 0000 0011b

If both the start and stop bits are set, a momentary event will be initiated on the selected camera. Pre-

event video will be recorded at the event record rate for the selected camera. The post-event timer will

continue recording at the event record rate, after which the selected camera will resume recording at

the normal record rate.

NOTE

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 80 81

No comments

Ge Triplex DVMRe 4eZT User Manual Page 74