Ge 19209 GE Wireless Seven-Sound Door Chime Two Push User Manual

GE Model 19209 www.jascoproducts.com Wireless Door Chime Kit Installation Instruction

button. 1. Remove the battery from the push button transmitter. 2. Locate the 9 position jumper shown below. 9 position jumper (This pushbutton is

Parking the jumper on an open set of pins. The two jumpers on the left are in the parked position. Setting The House Security Code Each chime compo

The chime and pushbutton must be set to the same house security code for the combination to operate together. Note: The push button has 3 additiona

Push Button Jumpers Chime Jumpers 5. Jumpers 1-6 are used to select 1 of 64 possible

b. Replacing the back cover 1. Push buttons are typically mounted at the same height as the door knob or handle (between 36" and 44" abo

3. Use back cover of push button as a template to mark two screw holes. 4. Drill two holes with 3/32” drill in marked locations. 5. Secure back

6. Place the chime unit’s keyhole slots over the screws and press down on the chime unit to secure it. Operation 1. Slide power switch to “On” t

Troubleshooting Chime doesn't work: 1. Make sure push button switch is depressed and held for at least 1 second. 2. Make sure plastic tag is r