GE 60-639-95R-OD User Manual download pdf

)

,QVWDOODWLRQ,QVWUXFWLRQV

*(,QWHUORJL[

Product

Summary

A passive-infrared (PIR) motion sensor detects movement within a specific area by sensing the

infrared energy emitted from a body as it moves across the sensor’s field of view. When this

motion is detected, the sensor transmits an alarm signal to the control panel.

Use the indoor motion sensor to protect locations where door/window sensors are impractical or

not needed. For example, use a motion sensor to protect large areas or open floor plans. Motion

sensors also provide backup protection for door/window sensors.

Use the outdoor motion sensor to identify motion in a protected outdoor area. Detected motion in

this protected area can sound chimes or turn on outside lights.

Note

Do not use outdoor motion sensors for intrusion protection.

The wireless motion sensor includes the following features:

• 35 feet by 40 feet coverage area for standard and optional animal alley lenses

• Masking kit provided to block portions of the coverage area

• Three minute transmitter lockout time after an alarm, helping to extend battery life

• Cover-activated tamper (optional wall-activated tamper is included)

• Supervisory signals transmitted every 64 minutes to the control panel

• Sensor low battery reports (trouble) to the control panel

• Field-selectable sensitivity options

Installation Indoor Installation Guidelines

Use the following guidelines for installing indoor motion sensors.

• If possible, locate sensors within 100 feet of the panel. While a transmitter may have a range

of 500 feet or more out in the open, the environment at the installation site can have a signif-

icant effect on transmitter range. Sometimes a change in sensor location can help overcome

adverse wireless conditions.

• The recommended mounting height is 7 1/2 feet, but the sensor can be mounted from 5 to 8

feet high in the corner of the area you want to protect. See the animal alley lens guidelines for

mounting the optional animal alley lens. Higher mounting provides better range (up to 35

feet), and lower mounting provides better protection close to the motion sensor (see Figures

2 and 3). The optional swivel mount (part #60-737) can be used for difficult mounting loca-

tions.

• Position the sensor to protect an area where an intruder would be most likely to walk across

the detection pattern (see Figure 1).

• Mount the motion sensor on a rigid surface which is free from vibrations.

• Do not aim the sensor at windows, fireplaces, air conditioners, area heaters, forced air heat-

ing vents, or place it in direct sunlight. Sudden changes in temperature may trigger a false

alarm from these devices.

• Do not mount the sensor near duct work or other large metallic surfaces which may affect the

RF signals (see RF Testing). Actual acceptable transmitter range should be verified for each

installation.

• Mount the sensor permanently on a flat wall or in a corner. Do not set it on a shelf.

• Windows should be closed in any area which has an armed motion sensor.

• A pet will trigger a motion sensor. See animal alley lens guidelines to use a motion sensor

when pets are present.

• Mount the motion sensor on an insulated, outside wall facing in.

• Position the sensor so it faces a solid reference point, like a wall.

'RFXPHQW1XPEHU5HY(

1RYHPEHU

,QGRRU2XWGRRU3,50RWLRQ

6HQVRUV

Model Nos.

60-639-95R

60-639-95R-OD

60-639-43-EUR

60-639-43-EUR-OD

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - ,QGRRU2XWGRRU3,50RWLRQ

)1,QVWDOODWLRQ,QVWUXFWLRQV*(,QWHUORJL[Product SummaryA passive-infrared (PIR) motion sensor detects movement within a specific area by sensing the i

Page 2 - Indoor Motion

2Indoor/Outdoor PIR Motion Sensors Installation InstructionsOutdoor Installation GuidelinesUse the following guidelines for installing outdoor motion

Page 3 - The wall-tamper switch can

3Indoor/Outdoor PIR Motion Sensors Installation InstructionsFigure 5. Wall Mounting Options¾ Use the following procedure to mount the sensor.1. Remove

Page 4 - Setting the Sensitivity

4Indoor/Outdoor PIR Motion Sensors Installation InstructionsIndoor Motion Sensor Lens Replacement1. To change the lens, first remove the sensor from i

Page 5 - Coverage

5Indoor/Outdoor PIR Motion Sensors Installation InstructionsOutdoor Motion SensorMounting1. Determine the desired mounting location for the sensor lea

Page 6 - Replacing Batteries

6Indoor/Outdoor PIR Motion Sensors Installation Instructions1. Determine which detection zone/lens segment needs a masking label.2. Peel the desired m

Page 7 - Conformity

7Indoor/Outdoor PIR Motion Sensors Installation Instructions¾ To relocate a sensor:1. Test the sensor a few inches from the original position.2. Incre

Page 8 - *(,QWHUORJL[

8Indoor/Outdoor PIR Motion Sensors Installation InstructionsNotices Approved for use in the countries marked with a check (9).(9) Austria (9) Germany

Comments to this Manuals

No comments

GE 60-639-95R-OD User Manual

Browse online or download User Manual for Motion detectors GE 60-639-95R-OD. GE 60-639-95R-OD User's Manual

Summary of Contents

Comments to this Manuals