Ge 25922 User Manual download pdf



Your telephone equipment is approved for connection to the Public Switched Telephone

Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the

Technical Requirements for Telephone Terminal Equipment published by ACTA.

 

On the bottom of this equipment is a label indicating, among other information, the

US number and Ringer Equivalence Number (REN) for the equipment. You must, upon

request, provide this information to your telephone company.

The REN is useful in determining the number of devices you may connect to your

telephone line and still have all of these devices ring when your telephone number is

called. In most (but not all) areas, the sum of the RENs of all devices connected to one line

should not exceed 5. To be certain of the number of devices you may connect to your line

as determined by the REN, you should contact your local telephone company.

A plug and jack used to connect this equipment to the premises wiring and telephone

network must comply with the applicable FCC Part 68 rules and requirements adopted

by the ACTA. A compliant telephone cord and modular plug is provided with this product.

It is designed to be connected to a compatible modular jack that is also compliant. See

installation instructions for details.



• This equipment may not be used on coin service provided by the telephone company.

• Party lines are subject to state tariffs, and therefore, you may not be able to use your

own telephone equipment if you are on a party line. Check with your local telephone

company.

• Notice must be given to the telephone company upon permanent disconnection of your

telephone from your line.















1. Locate battery and battery door which are packaged together inside a plastic bag

and are separate from the handset.

2. Locate the battery compartment on the back of the handset.

3. Plug the battery pack cord into the jack inside the compartment.

PLEASE REGISTER

shows in the display.





2. Plug one end of the telephone line cord into the TEL LINE jack at the back of the base

and the other end into a modular jack.

3. Plug the AC power converter into the electrical outlet and the DC connector into the

jack at the back of the base.

4. Place the handset in the base cradle. The charge/in use indicator turns on, verifying

the battery is charging.

The unit will take 20 seconds to register and verify its security

code. READY shows in the handset’s display.



UNAVAILABLE





5. Allow the phone to charge for 16 hours prior to rst use. If you don’t properly charge

the phone, battery performance is compromised.











1. Turn the base over.

2. Attach the wall mounting pedestal by rst inserting the tabs on the open edge of

the pedestal into the slots on the lower portion of the bottom of the base. Then push

down and snap the pedestal into place.

3. Slip the mounting holes (on the back of the base) over the wall plate posts, and slide

the unit down into place. (Wall plate not included.)







There are eight programmable menus available: Language, Handset Name, Area Code,

Ringer On/Off, Ringer Tone, Tone/Pulse, Transfer ON/OFF and Default Setting.

During programming, you may press the  button at any time to go to the

next option. To exit the menu, keep the previous setting and return to the standby

mode, press the  button.



1. Press the button until 41ENG 2FRA 3ESP shows in the display. 1ENG is

the default. (ENG stands for English. FRA stands for French. ESP stands for Spanish.)

2. Use the  (5or6) button or the touch-tone pad on the handset

to enter your selection.

3. Press

 again to save.



1. Press the  button until ENTER NAME shows in the display.

2. Use the touch-tone pad on the handset to enter the name (up to 15 characters).

More than one letter is stored in each of the number keys. For example, to enter the

name Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the

letter I. Press the 5 key 3 times for the letter L. Wait for one second. Press the 5 key 3

times for the second letter L. Press the 1 key to insert a space between the L and the

S. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press

the 4 key 3 times for the letter I; press the 8 key for the letter T; press the 4 key twice

for the letter H..





3. Press  again to save.



READY



1. Press the  button until AREA CODE - - - shows in the display. - - - is

the default.

2. Use the touch-tone pad on the handset to enter your three digit area code.

3. Press

 again to save.







1. Press the  button until RINGER 41 ON shows in the display.

1 ON is the default.

2. Use the

 (5or6)

button or the touch-tone pad on the handset

to scroll to 1 ON or 2 OFF.

3. Press

 to save.

RINGER OFF



You can choose from 3 ring tones.

1. Press the

 button until RINGER TONE 401 shows in the display.

01 is the default.

2. Use the

 (5or6)

button on the handset to select from 01 to 03.

3. Press

 to save.



1. Press the  button until 41 TONE 2 PULSE shows in the display.

1 TONE is the default.

2. Use the

 (5or6)

button or the touch-tone pad on the handset

to scroll to 1 TONE or 2 PULSE.

3. Press

 to save.



In order to use the Call Transfer feature (applicable ONLY with additional handsets),

you must have the Transfer ON/OFF set to ON through the menu of the transferring

handset.

1. Press the

 button until TRANSFER 41 OFF shows in the display.

2. Use the

 (5or6)

button or the touch tone pad on the handset

and select 1OFF.

3. Press

 again to save.



You may return handset settings to the factory default setup using this menu.

1. Press the

 button until DEFAULT 4NO shows in the display. NO is

the default.

2. Use the

 (5or6)

button on the handset to scroll to YES or NO.





3. Press  to save.





The phone is  when the charge/in use indicator on the base is lit. The handset visual

ringer and base indicator ash when you receive a call.



1. When the phone rings, pick up the handset and press the  button.

2. When nished, press the 

button again or place the handset on the

base cradle to hang up.



1. Pick up the handset and press the  button. Wait for the dial tone.

The call timer starts counting minutes and seconds in the display.

2. Dial a telephone number.

3. When nished, press the 

button again or place the handset on the

base cradle to hang up.



UNAVAILABLE







1. Make sure the phone is  (not in TALK mode).

2. Dial a telephone number (the number you dial shows in the display).







3. Press the  button on that handset. The number automatically dials

and the call timer starts counting the minutes and seconds in the display.

4. When nished, press the 

button again to hang up.





While the phone is  (in TALK mode), press the  button to redial the last number

you dialed (up to 32 digits).



While the phone is  (in standby mode), press the  button and then the



button to redial the last number.



Use the  button to activate custom calling services such as call

waiting, which are available through your local phone company.







While talking on the phone, it may be necessary for you to manually change the

channel to improve reception and reduce noise or static on the line. Press and release

the  button to move to the next clear channel.



Press the  button to cancel any command you initiated.



This feature assists in locating a misplaced handset.

Press the  button on the base. The handset beeps continuously for about 2

minutes until you press the  button on the handset or the  button

on the base.





Apart from the setting in the main menu, there is a shortcut to set the ringer. Make sure

the phone is  (not in talk mode).

1. Press the  button to go to the  menu.

RINGER 41 ON shows in the display. 1 ON is the default.

2. Use the

 (5or6)

button or the touch-tone pad on the handset

to scroll to 1 ON or 2 OFF.

3. Press the  button to save your selection. You will hear a

conrmation tone.



When the phone is  (in TALK mode) press the

 (5or6)

button to

adjust the listening level. Choose from ve volume settings. VOL 1 is the lowest volume

and VOL 5 is the highest volume.

VOL 5VOL 4





Use mute during a phone conversation to speak privately and off-line with a third party.

1. Press the

 button. MUTE shows in the display. The party on the telephone

will not hear you.

2. Press the

 button when nished.

Model 25922C

00017560 (Rev. 4 Dom E)

08-05

Printed in China

For  there will be  additional handset, charge cradle, battery pack

and cover than shown above.

For  there will be  additional handsets, charge cradles, battery

packs and covers than shown above.

For  there will be  additional handsets, charge cradles, battery

packs and covers than shown above.



To use this phone, you need an RJ11C type modular telephone

jack, which might look like the one pictured here, installed in

your home. If you don’t have a modular jack, call your local

phone company to nd out how to get one installed.





Your cordless phone uses a digital security system to protect against false ringing,

unauthorized access, and charges to your phone line.



































• Avoid sources of noise and heat, such as motors, uorescent lighting, microwave

ovens, heating appliances and direct sunlight.

• Avoid areas of excessive dust, moisture and low temperature.

• Avoid other cordless telephones or personal computers.

• Never install telephone wiring during a lightning storm.

• Never install telephone jacks in wet locations unless the jack is specically

designed for wet locations.

• Never touch non-insulated telephone wires or terminals, unless the telephone line

has been disconnected at the network interface.

• Use caution when installing or modifying telephone lines.











This feature is useful only if you have pulse (rotary) service. Temporary Tone Dialing

enables pulse (rotary) service phone users to access touch tone services offered by

banks, credit card companies, etc. For example, when you call your bank you may need

to enter your bank account number. Temporarily switching to touch tone mode allows

you to send your number.

1. Dial the telephone number and wait for the line to connect.

2. When your call is answered, press the

 button on the handset to

temporarily change from pulse dialing to tone dialing.

3. Follow the automated instructions to get the information you need.

4. Hang up the handset and the phone automatically returns to pulse (rotary)

dialing mode.





During an external call, you may transfer the external call to another handset.

1. Press the

 button on the originating handset. TRANSFERRING shows in

the display. All registered handsets will be paged.

2. Press the

 button or  on receiving handset to answer

call.



























This unit receives and displays information transmitted by your local phone company.

This information can include the phone number, date, and time; or the name, phone

number, date, and time.



Provided you subscribe to Call Waiting Caller ID service from your phone company; if

you receive an incoming call and you are already on the phone, a beep indicates the

presence of a Call Waiting call on the line. Only the handset that is in use at the time of

the call will display and store the Call Waiting Caller ID information.

• When you hear the call waiting beep in the handset receiver, press the





button to put the current call on hold and answer the incoming call.

Press the  button again to return to the original call.



When you receive a call, the Caller ID information is transmitted between the rst and

second ring. The Caller ID information appears on the display while the phone rings,

giving you a chance to monitor the information and decide whether or not to answer

the call.



If you are not at home or cannot answer, your telephone’s Caller ID memory stores the

data for the 40 most recent calls you received so you can see who called while you

were unavailable. When the 41st call is received, the oldest Caller ID record (1st call) is

automatically deleted.

You may review the stored information at any time. Calls received since your last review

show as NEW in the display. Calls that have not been previously reviewed but were

received from the same number more than once show as REPT in the display.

• If your home has specially wired alarm equipment connected to the telephone line,

ensure the installation of this product does not disable your alarm equipment.

• If you have questions about what will disable alarm equipment, consult your telephone

company or a qualied installer.





 

Should your equipment cause trouble on y our line which may harm the telephone

network, the telephone company shall, where practicable, notify you that temporary

discontinuance of service may be required. Where prior notice is not practicable and the

circumstances warrant such action, the telephone company may temporarily discontinue

service immediately. In case of such temporary discontinuance, the telephone company

must: (1) promptly notify you of such temporary discontinuance; (2) afford you the

opportunity to correct the situation; and (3) inform you of your right to bring a complaint

to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules

and Regulations.

The telephone company may make changes in its communications facilities, equipment,

operations or procedures where such action is required in the operation of its business

and not inconsistent with FCC Rules and Regulations. If these changes are expected to

affect the use or performance of your telephone equipment, the telephone company

must give you adequate notice, in writing, to allow you to maintain uninterrupted service.



This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference; and (2) This device

must accept any interference received, including interference that may cause undesired

operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation.

Privacy of Communications may not be ensured when using this product.

If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna (that is, the antenna for radio or television

that is “receiving” the interference).

• Reorient or relocate and increase the separation between the telecommunications

equipment and receiving antenna.

• Connect the telecommunications equipment into an outlet on a circuit different from

that to which the receiving antenna is connected.

If these measures do not eliminate the interference, please consult your dealer or an

experienced radio/television technician for additional suggestions. Also, the Federal

Communications Commission has prepared a helpful booklet, “How To Identify and Resolve

Radio/TV Interference Problems.” This booklet is available from the U.S. Government Printing

Ofce, Washington, D.C. 20402. Please specify stock number 004-000-00345-4 when

ordering copies.

Notice: The changes or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.



This telephone system meets FCC standards for Hearing Aid Compatibility.



Licensed under US Patent 6,427,009.



This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance of

20 centimeters between the radiator and your body. This transmitter must not be co-located

or operated in conjunction with any other antenna or transmitter.”

























(for model 25922xx1)

Make sure your package includes the items shown here.



1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and

place your cordless telephone on a level surface, such as a desktop or tabletop, or

you may mount it on the wall.

black wire

red wire

battery

pack

PRESS DOWN

FIRMLY





6



5

















































 

















4. Insert the battery pack.

5. Close the battery compartment by pushing the door up until it snaps into place.

 















101 West 103rd St.

Indianapolis, IN 46290-1102

Trademark(s) ® Registered

Marca(s) Registrada(s)





1 2

Summary of Contents

Page 1 - 

Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with p

Page 2 - 

As calls are received and stored, the display is updated to let you know how many calls have been received. To scroll CID records

Comments to this Manuals

No comments

Ge 25922 User Manual

Browse online or download User Manual for Handset Cordless Phone Ge 25922. GE 25922 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Handset Cordless Phone Ge 25922