GE DI Series Round Wall Wash Installation Guide download pdf

Lighting

imagination at work

(DI Series)

Lumination

LED Luminaire

Installation Guide

BEFORE YOU BEGIN

Read these instructions completely and carefully.

WARNING/AVERTISSEMENT

RISK OF ELECTRIC SHOCK

• Turn power off before inspection, installation or removal.

• Properly ground electrical enclosure.

RISK OF ELECTRIC SHOCK

• Follow all NEC and local codes.

• Use only UL approved wire for input/output connections.

Minimum size 18 AWG or 14 AWG for continuous runs.

RISQUES DE DÉCHARGES ÉLECTRIQUES

• Coupez l’alimentation avant d’’inspecter, installer ou déplacer le luminaire.

• Assurez-vous de correctement mettre à la terre le boîtier d’alimentation électrique.

RISQUES D’INCENDIE

• Respectez tous les codes NEC et codes locaux.

• N’utilisez que des ls approuvés par UL pour les entrées/sorties de

connexion. Taille minimum 18 AWG ou 14 AWG pour les rangées continues.

Save These Instructions

Use only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.

Prepare Electrical Wiring

Electrical Requirements

• The LED driver must be supplied with 120V for

DIXXXXXXX1VXX xtures, 277V for DIXXXXXXX2VXX

xtures, and 347V for DIXXXXXXX3VXX xtures,

50/60 Hz and connected to an individual properly

grounded branch circuit, protected by a 20 ampere

circuit breaker. Use min. 75°C supply conductor.

Grounding Instructions

• The grounding and bonding of the overall system shall

be done in accordance with National Electric Code

(NEC) Article 600 and local codes.

1 2 3 4

Summary of Contents

Page 1 - LED Luminaire

GELightingimagination at work(DI Series)LuminationTM LED LuminaireInstallation GuideBEFORE YOU BEGINRead these instructions completely and carefully.

Page 2 - Unit Installation

1633Cut the appropriate size hole into ceiling tile (see table at right).Slide reector into the xture. Verify reector trim is ush with ceiling. R

Page 3 - Electrical Connections

Electrical ConnectionsThermal protectorAC lineFrom moduleholderConnect the black (line) of the AC line to the black 120V, 277V, or 347V wire. Connect

Page 4 - IND077-022315

IND077-022315This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause h

Comments to this Manuals

No comments

GE DI Series Round Wall Wash Installation Guide

Browse online or download Installation Guide for Flat panel ceiling mounts GE DI Series Round Wall Wash. GE DI Series Round Wall Wash Installation Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Flat panel ceiling mounts GE DI Series Round Wall Wash