GE 60226HD-2PK Instruction Manual

Browse online or download Instruction Manual for Fireplaces GE 60226HD-2PK. GE 60226HD-2PK Instructions / Assembly User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
MODEL NO. FPL-100/2F (0.34)
100 LIGHT
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be followed including the following:
a)
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
b)
Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.
When products are used in outdoor applications, connect the product to a Ground Fault Circuit
Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper
installation.
c)
This seasonal use product is not intended for permanent installation or use.
d)
Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of
heat.
e)
Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
f)
Do not let lamps rest on the supply cord or on any wire.
g)
Unplug the product when leaving the house, when retiring for the night, or if left unattended.
h)
This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock
it should not be played with or placed where small children can reach it.
i)
Do not use this product for other than its intended use.
j)
Do not hang ornaments or other objects from cord, wire, or light string.
k)
Do not place lighting string on carpeting, drapes, furniture, or allow it to contact vinyl siding while
the power is on.
l)
Do not perform any maintenance or troubleshoot for bad or broken lamps while the power is on.
m)
Do not close doors or windows on the product or extension cords as this may damage the wire
insulation.
n)
Do not cover the product with cloth, paper or any material not part of the product when in use.
o)
This product is equipped with push-in type lamps. Do not twist lamps.
p)
This product employs overload protection (fuse). A blown fuse indicates an overload or short-
circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional
strings or products that may be attached to the product. Replace the fuse as per the user
servicing instructions (follow product marking for proper fuse rating) and check the product. If the
replacement fuse blows, a short-circuit may be present and the product should be discarded.
q)
Read and follow all instructions that are on the product or provided with the product.
r)
SAVE THESE INSTRUCTIONS
Use and Care Instructions
a)
When the product is placed on a live tree, the tree should be well maintained and fresh. Do
not place on live trees in which the needles are brown or break off easily. Keep the tree
holder filled with water.
b)
If the product is placed on a tree, the tree should be well secured and stable.
c)
Before using or reusing, inspect product carefully. Discard any products that have cut, damaged,
or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or
exposed copper wire.
d)
When storing the product, carefully remove the product from wherever it is placed, including tree
branches, or bushes, to avoid any undue strain or stress on the product conductors, connections,
and wires.
MADE IN PHILIPPINES
e)When not in use, store neatly in a cool, dry location protected from sunlight.
User Servicing Instructions
Fuse replacement:
Most often, fuses blow because too many sets have been strung end-to-end.
a) Before changing fuses, make sure the set is unplugged.
b) Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.
c) Using a flathead screwdriver, open fuse cover. Slide open
the fuse access cover on top of attachment plug towards blades.
d) Removes fuses carefully.
e) Risk of fire. Replace fuse only with 3 Amp, 125 Volt fuse (provided with product).
f) Close fuse cover. Slide closed the fuse access cover on top of current tap.
Make sure door is fully closed and fuses are completely covered.
g)
Risk of fire. Do not replace current tap. Contains a safety device (fuse) that
should not be removed. Discard product if the current tap is damaged.
Bulb replacement:
Before changing bulbs, make sure set is unplugged.
Step 1:
Grasp plug and remove from the
Step 3:
Replace lamp with only 2.5 Volt,
receptacle or other outlet device. 0.425 Watt super brightness midget push-
Do not unplug by pulling on cord. in type lamp provided with product.
Step 2:
Hold bulb by the plastic base Push spare bulb/base assembly into socket.
and pull bulb/base straight Do not twist bulb when inserting into socket.
out of socket. If bulbs are twisted, part of the set will not light.
If the spare bulbs provided with the product have no plastic base or
the plastic base does not fit , first follow steps 1 – 2 above. Then
a)
Remove the old bulb by straightening the bulb wires and
pulling bulb straight from the base.
b)
Replace the new bulb by straightening the bulb leads and
aiming each wire into a separate hole in the plastic base.
c)
Make sure each bulb lead comes out an exit opening at the bottom of the plastic base.
Now bend each lead up such that each bulb lead fits closely agains the narrow side of the plastic base.
1. This lighting string is rated 40.8 Watts (0.34 Amps), do not overload.
Connect other lighting strings or decorative outfits end-to-end up to a
maximum of 216 Watts (1.8 Amps) total. If connecting to a lighting string that does not have a
Wattage (W) rating {found on the tag within 6 inches of the plug} calculate the wattage as follows
:
Multiply the current (0.34A) which is on the flag-type tag by 120.
For example: Lighting string is rated 120 V, 60 Hz, 0.34 Amps. 0.34 X 120 = 40.8 Watts
Add the wattage of each light string together for a total of 216 Watts or less. (Do not exceed
216 Watts.)
2. To reduce the risk of over heating, replace burned-out lamps promptly. Use 2.5 Volt, 0.425 Watt
lamps only.
3. To reduce the risk of fire and electric shock: a) Do not install on trees having needles, leaves or
branch coverings of metal or materials which look like metal, and b) Do not mount or support strings
in a manner that can cut or damage wire insulation.
For questions and/ or assistance, call customer service at 1-877-398-7337
or visit us on the web at www.geholidaylighting.com.
Nicolas Holiday Inc., 9F., No. 35, Guangfu N. Rd. Taipei, Taiwan 10560
All rights reserved.
Page view 0
1 2

Summary of Contents

Page 1 - Use and Care Instructions

MODEL NO. FPL-100/2F (0.34) 100 LIGHT IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should alw

Page 2

MODELO NO. FPL-100/2F(0.34) 100 LUCES IIMPORTANTES INSTRUCCIONES SOBRE SEGURIDAD Cuando se usan productos eléctricos se

Comments to this Manuals

No comments