GE BedroomPhone 00004548 User Manual

Browse online or download User Manual for Answering machines GE BedroomPhone 00004548. GE BedroomPhone 00004548 User's Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Model 29297
00004548 (Rev. 2 DOM E)
07-12
Printed in China
Equipment Approval Information
Your telephone equipment is approved for connection to the Public Switched
Telephone Network and is in compliance with parts 15 and 68, FCC Rules and
Regulations and the Technical Requirements for Telephone Terminal Equipment
published by ACTA.
1 Notification to the Local Telephone Company
On the bottom of this equipment is a label indicating, among other information,
the US number and Ringer Equivalence Number (REN) for the equipment. You
must, upon request, provide this information to your telephone company.
The REN is useful in determining the number of devices you may connect to
your telephone line and still have all of these devices ring when your telephone
number is called. In most (but not all) areas, the sum of the RENs of all devices
connected to one line should not exceed 5. To be certain of the number of
devices you may connect to your line as determined by the REN, you should
contact your local telephone company.
A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and modular
plug is provided with this product. It is designed to be connected to a compatible
modular jack that is also compliant. See installation instructions for details.
Notes
This equipment may not be used on coin service provided by the telephone
company.
Party lines are subject to state tariffs, and therefore, you may not be able to
use your own telephone equipment if you are on a party line. Check with your
local telephone company.
Notice must be given to the telephone company upon permanent
disconnection of your telephone from your line.
If your home has specially wired alarm equipment connected to the telephone
line, ensure the installation of this product does not disable your alarm
equipment. If you have questions about what will disable alarm equipment,
consult your telephone company or a qualified installer.
US NUMBER IS LOCATED ON THE CABINET BOTTOM
REN NUMBER IS LOCATED ON THE CABINET BOTTOM
SEE MAR KING ON BOTTOM / BA CK O F PRODUCT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO
PREVENT FIRE OR
ELECTRICAL SHOCK
HAZARD, DO NOT
EXPOSE THIS
PRODUCT TO RAIN
OR MOISTURE.
THE LIGHTNING
FLASH AND ARROW
HEAD WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
“DANGEROUS
VOLTAGE” INSIDE
THE PRODUCT.
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR
BACK). NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
CAUTION:
Handset
Base
AC power
adaptor
Telephone
line cord
Handset cord
display
brightness
switch
handset
cord
phone
line cord
power
adaptor jack
2 Rights of the Telephone Company
Should your equipment cause trouble on your line which may harm the telephone
network, the telephone company shall, where practicable, notify you that
temporary discontinuance of service may be required. Where prior notice is not
practicable and the circumstances warrant such action, the telephone company
may temporarily discontinue service immediately. In case of such temporary
discontinuance, the telephone company must: (1) promptly notify you of such
temporary discontinuance; (2) afford you the opportunity to correct the situation;
and (3) inform you of your right to bring a complaint to the Commission pursuant
to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations.
The telephone company may make changes in its communications facilities,
equipment, operations or procedures where such action is required in the
operation of its business and not inconsistent with FCC Rules and Regulations. If
these changes are expected to affect the use or performance of your telephone
equipment, the telephone company must give you adequate notice, in writing, to
allow you to maintain uninterrupted service.
Interference Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference; and (2)
This device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna (that is, the antenna for radio or
television that is “receiving” the interference).
Reorient or relocate and increase the separation between the
telecommunications equipment and receiving antenna.
Connect the telecommunications equipment into an outlet on a circuit different
from that to which the receiving antenna is connected.
If these measures do not eliminate the interference, please consult your dealer or an
experienced radio/television technician for additional suggestions. Also, the Federal
Communications Commission has prepared a helpful booklet, “How To Identify and
Resolve Radio/TV Interference Problems.” This booklet is available from the U.S.
Government Printing Office, Washington, D.C. 20402. Please specify stock number
004-000-00345-4 when ordering copies.
Licensing
Licensed under US Patent 6,427,009.
Hearing Aid Compatibility (HAC)
This telephone system meets FCC standards for Hearing Aid Compatibility.
Important Installation
Information
Never install telephone wiring during a lightning storm.
Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
Never touch uninsulated telephone wires or terminals, unless the
telephone line has been disconnected at the network interface.
Use caution when installing or modifying telephone lines.
Temporarily disconnect any equipment connected to the phone
such as faxes, other phones, or modems.
Important Installation Guidelines
Install telephone near both a telephone (modular) jack and an
electrical power outlet.
Avoid sources of noise, such as a window by a busy street,
and electrical noise, such motors, microwave ovens, and
fluorescent lighting.
Avoid heat sources, such as heating air ducts, heating appliances,
radiators, and direct sunlight.
Avoid areas of excessive moisture or extremely low temperature.
Avoid dusty locations.
Avoid other cordless telephones or personal computers.
Handset and Base Layout
Installing the Phone
Connecting the Telephone Line
Choose the best location to install your telephone. Your telephone
should be placed on a level surface, such as a desk or table top.
1. Plug one end of the straight
telephone line cord into the
PHONE LINE jack on the base.
2. Plug the other end into a wall
jack.
3. Plug one end of the coiled
handset cord into the jack on
the handset.
4. Plug the other end into the HANDSET jack on the back of the base.
5. Place the handset on the base cradle.
6. Set the RINGER and DISPLAY BRIGHTNESS switches on the back of
the base to the desired settings.
7. Set the VOL switch on the side of the handset to the
desired setting.
Connecting the Electrical Power
1. Plug one end of the power supply cord into the back of the base.
2. Plug the other end into an electrical outlet.
CAUTION: To reduce risk of personal injury, fire, or
damage use only the 5-2769 power adaptor listed in
the user’s guide. This power adaptor is intended to be
correctly orientated in a vertical or floor mount position.
“No Worry” Battery Backup
This telephone is equipped with a memory holding system
powered by a customer-installed 9-volt alkaline battery
(not included).
When electrical power is interrupted, or the electrical line is
unplugged, the battery operates the clock to retain the time of day
and alarm settings in memory. When the unit is running on battery
power, the digital display does not light up; however, if wake time
occurs during the power interruption, the alarm buzzer sounds
(regardless of the type of alarm tone selected) if remaining battery
power is adequate. Normal operation resumes after electrical power
is restored.
Install the backup battery as follows:
1. Remove the battery compartment cover
located on the bottom of the base.
2. Connect a fresh 9-volt alkaline battery
(not included). Interlock the large and
small contacts on the battery clip and the
battery. Once connected, place the battery
inside the battery compartment.
3. Replace the battery compartment cover.
NOTE: Alkaline (NEDA 1604A) batteries are
recommended. Carbon-zinc (NEDA 1604) batteries
may be used but memory holding time will be
substantially reduced. Memory holding time for a
fresh alkaline battery is approximately 3 months (if
Wake System is not activated), which should take
care of short, nuisance-type AC power failures.
To preserve battery life, the phone should remain
plugged into an AC electrical outlet. As the battery
gets older, its voltage drops and memory may be
lost. Be sure to replace the battery periodically. A
backup battery is not included with this telephone.
NOTE: If battery is not installed:
a) All memory will be lost if the unit is unplugged for
more than 60 seconds.
b) The clock will stop running during a power outage
period but will start running when power resumes.
The clock will blink to indicate that the time may not
be correct.
IMPORTANT: If storing this unit for more than 30
days, remove the battery.
Set Up
Language
This adjustment lets you choose the language of the messages that show
in the display- English, French, or Spanish.
1. Press and release the SET button until ENG FRA ESP shows in
the display.
2. Use the CID
5
or
6
button to select ENG, FRA or ESP.
3. Press SET to save. SET REAL TIME shows in the display.
NOTE: Press DIAL to skip to the next set up step or
press DELETE to exit the main menu.
Real Time
NOTE: The telephone company sends the current
time and date with the Caller ID (CID) information.
If you don’t manually set the clock time, the unit
automatically sets the time and date when the first
call is received.
1. Use the CID
5
or
6
button to set the time of day.
2. Press and hold CID
5
or
6
button for 3 seconds to quickly increase
or decrease the setting in 15 minutes increments.
3. Press SET to save. CONTRAST shows in the display, and the current
contrast level blinks in the display.
NOTE: Press DIAL to skip to the next set up step or
press DELETE to exit the main menu.
Display Contrast
This setting allows you to adjust the display contrast for
easier viewing.
1. Use the CID
5
or
6
button to select level 1, 2, 3, 4, or 5.
2. Press SET to save. - - - LOCAL AREA CODE shows in the display.
NOTE: Press DIAL to skip to the next set up step or
press DELETE to exit the main menu.
Area Code
1. Use the CID
5
or
6
button to enter the first digit.
2. Press SET. Use the CID
5
or
6
button to enter the second digit.
NOTE: If you make a mistake, press the DELETE
button to erase all of the digit(s) and start over. Or
press the DIAL button to exit the main menu.
3. Press SET. Use the CID
5
or
6
button to enter the third digit.
4. Press SET and the unit returns to the main menu.
Display Backlight
Use the DISPLAY BRIGHTNESS switch on the back of the base to adjust
the display brightness. Settings are Hi, Med or Lo.
NOTE: The unit must be connected to an electrical
outlet to adjust display brightness.
Telephone Operation
Ringer Volume
The RINGER switch is located on the back of the base. Set it to HI, LO,
or OFF.
NOTE: The RINGER switch must be set to HI or LO or
the phone will not ring for incoming calls.
Handset Receiver Volume
Use the VOL switch on the side of the handset to adjust the handset
receiver volume.
Flash
Press the FLASH button to activate customer calling services,
such as call transfer, which are services provided by your local
phone company.
Redial
Press the REDIAL button to dial the last number dialed when you hear
the dial tone in the handset.
NOTE: The redial feature holds in memory the last
phone number you dialed (as many as 32 digits). If
you pressed any numbers after dialing the phone
number, (for example, when accessing a voice-menu
system) those numbers are also redialed.
Telephone Jack Requirements
To use this phone, you need an RJ11C type
modular telephone jack, which might look like
the one pictured here, installed in your home. If
you don’t have a modular jack, call your local
phone company to find out how to get one
installed.
DIAL (button)
DELETE
(button)
SLEEP
(button)
ALARM 2
(button)
ALARM 1
(button)
AM/FM
(button)
SET
(button)
ALARM OFF
(button)
RADIO
ON/OFF
(button)
CID
5
or
6
(Caller ID
button)
NEW CALL
indicator
FLASH
(button)
REDIAL
(button)
MEMORY
(button)
VOL switch
Quick Dial
buttons
STORE
(button)
volume
control
knob
radio
channel
tuning
knob
ringer switch
Before You Begin
Parts Checklist
Make sure your package includes the following items:
Thomson Digital Technologies Ltd.
© 2007 Thomson Digital Technologies Ltd.
Trademark(s) ® Registered
Marque(s) déposée(s)
SNOOZE
(button)
Model 29297
Caller ID
BedroomPhone™
with Dual-Wake Alarms
and AM/FM Radio
User’s Guide
Modular
telephone
line jack
Wall plate
-
-
+
+
Battery clip
Battery
Page view 0
1 2

Summary of Contents

Page 1 - Marque(s) déposée(s)

Model 2929700004548 (Rev. 2 DOM E)07-12Printed in ChinaEquipment Approval InformationYour telephone equipment is approved for connection to the Public

Page 2

Alarm OperationThe 29297 is equipped with two alarms. The alarms can be set independently to either radio or buzzer.Setting the Alarm Time1. Press A

Comments to this Manuals

No comments